EN 10025-2 S235J0 Steel: Supply & Demand
Buyer RFQ demand against seller listing supply for EN 10025-2 S235J0, broken down by form. Signals are indicative and derived from listings and RFQs.
Last updated: 16 Oct 2026, 1:00 AM
Lifetime: This grade’s supply and demand by form, across everything ever listed on M-EX. Use this for the long view. For example, “Has this grade historically drawn more buyers than sellers?”
| Form |
Supply |
Demand |
Status |
Price Band (Rs./MT) |
| Plate |
34 |
1 |
Deep Supply |
56,008
to
68,564
median 66,116
|
EN 10025-2 S235J0's demand ranks in the top 38% of all 484 tracked grades platform-wide.
Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.
EN 10025-2 S235J0 is a Structural Steel grade: S235J0: non-alloy structural steel, hot rolled flat and long products, impact tested at 0 deg C (steel number 1.0114). Specified in EN 10025-2:2019.
Typical applications: Used for structural beams, bridges, frames, plates, construction equipment, and welded structures..
Equivalent / Similar Grades (8)
| Grade |
Standard |
Region |
|
S235J2
|
EN 10025-2 |
Europe |
|
260W
|
CSA G40.21 |
Canada |
|
HA250
|
AS/NZS 1594 |
Australia |
|
400W
|
CSA G40.21 |
Canada |
|
480W
|
CSA G40.21 |
Canada |
|
Grade 400
|
AS/NZS 3678 |
Australia |
|
Grade 450
|
AS/NZS 3678 |
Australia |
|
HA350
|
AS/NZS 1594 |
Australia |
Chemical Composition (%)
| C |
Mn |
P |
S |
N |
Cu |
| <=0.17 |
<=1.40 |
<=0.030 |
<=0.030 |
<=0.012 |
<=0.55 |
Mechanical Properties
| Tensile Strength |
360-510 MPa |
| Yield Strength |
>=235 MPa |
| Elongation |
>=26% |
| Condition |
Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces |