Close Alternative — 81.4% match
based on chemical composition and mechanical property overlap.
AS/NZS 3679.1 300 (AS/NZS 3679.1:2016) and GB/T 700 Q275B (GB/T 700:2006) are both steel grades.
Both fall under the Structural Steel category.
AS/NZS 3679.1 300 is typically used for hot-rolled structural bars and sections for general structural framing, while GB/T 700 Q275B is commonly used for hot rolled structural sheets, strips, sections and bars for welding, riveting and bolting engineering.
AS/NZS 3679.1 300 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while GB/T 700 Q275B is defined under Guobiao Standards (GB/T), originating from China.
As per chemical composition, AS/NZS 3679.1 300 vs GB/T 700 Q275B is a 96.6% match.
As per mechanical properties, the match is 50.9%.
Combined, this makes them a close alternative overall at 81.4%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
AS/NZS 3679.1 300
GB/T 700 Q275B
Tensile Strength
440-600 MPa
410-540 MPa
Yield Strength
300 MPa min
>=275 MPa
Elongation
22% min
>=22%
Condition
Not specified
Hot rolled, controlled rolled or normalized; yield up to 16 mm, elongation up to 40 mm (N/mm2 = MPa)
Typical Applications
AS/NZS 3679.1 300
Hot-rolled structural bars and sections for general structural framing
GB/T 700 Q275B
Hot rolled structural sheets, strips, sections and bars for welding, riveting and bolting engineering
Can AS/NZS 3679.1 300 Be Substituted With GB/T 700 Q275B?
AS/NZS 3679.1 300 and GB/T 700 Q275B are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between AS/NZS 3679.1 300 and GB/T 700 Q275B?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can AS/NZS 3679.1 300 be substituted with GB/T 700 Q275B?
AS/NZS 3679.1 300 and GB/T 700 Q275B are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.