Post Stock Login Register

AS/NZS 3679.1 300 vs IS 2062 E250B0

Related Material — 65% match based on chemical composition and mechanical property overlap.

AS/NZS 3679.1 300 (AS/NZS 3679.1:2016) and IS 2062 E250B0 (IS 2062:2011) are both steel grades. Both fall under the Structural Steel category. AS/NZS 3679.1 300 is typically used for hot-rolled structural bars and sections for general structural framing, while IS 2062 E250B0 is commonly used for structural sections, welded structures, bridges, transmission towers, industrial fabrication, engineering structures. AS/NZS 3679.1 300 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while IS 2062 E250B0 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, AS/NZS 3679.1 300 vs IS 2062 E250B0 is a 97.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 65%.

Frequently Compared With AS/NZS 3679.1 300:
CSA G40.21 480W CSA G40.21 400W AS/NZS 1595 C450 ASTM A1008 SS Grade 80 AS/NZS 1595 C350 ASTM A1008 SS Grade 50 IS 2062 E250A ASTM A572 Grade 50 ASTM A572 Gr.65 CSA G40.21 260W CSA G40.21 300W ASTM A283C
Match Breakdown
CHEMISTRY MATCH
97.5%
MECHANICAL MATCH
0%
OVERALL
65%
Specifications
Property AS/NZS 3679.1 300 IS 2062 E250B0
Standard AS/NZS 3679.1:2016 IS 2062:2011
Category Structural Steel Structural Steel
C (%) <=0.22 <=0.22
Mn (%) <=1.70 <=1.50
Si (%) <=0.50 <=0.40
P (%) <=0.040 <=0.045
S (%) <=0.040 <=0.045
CEV (%) Not specified <=0.41
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AS/NZS 3679.1 300 IS 2062 E250B0
Tensile Strength 440-600 MPa >=410 MPa
Yield Strength 300 MPa min 250 MPa (<=20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm)
Elongation 22% min >=23%
Impact Energy Not specified >=27 J at 0°C
Typical Applications
AS/NZS 3679.1 300
Hot-rolled structural bars and sections for general structural framing
IS 2062 E250B0
structural sections, welded structures, bridges, transmission towers, industrial fabrication, engineering structures
Key Differences
Can AS/NZS 3679.1 300 Be Substituted With IS 2062 E250B0?
AS/NZS 3679.1 300 and IS 2062 E250B0 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
AS/NZS 3679.1 300
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2700 mm (106.3–106.3 in)
IS 2062 E250B0
Angle → (6 listings)
Leg 1: 25–30 mm (0.98–1.18 in)
Leg 2: 20–25 mm (0.79–0.98 in)
Thickness: 3–5 mm (0.12–0.2 in)
On M-EX Right Now
AS/NZS 3679.1 300
2 active listings and RFQs →
IS 2062 E250B0
6 active listings and RFQs →
Frequently Asked Questions
What is the difference between AS/NZS 3679.1 300 and IS 2062 E250B0?
IS 2062 E250B0 specifies CEV which is not specified for AS/NZS 3679.1 300.
Can AS/NZS 3679.1 300 be substituted with IS 2062 E250B0?
AS/NZS 3679.1 300 and IS 2062 E250B0 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.