Post Stock Login Register

ASTM A588 vs IS 1570 (Part 6) 60T6

Related Material — 64.7% match based on chemical composition and mechanical property overlap.

ASTM A588 (ASTM A588) and IS 1570 (Part 6) 60T6 (IS 1570 (Part 6):1996) are both steel grades. ASTM A588 is classified under Structural Steel (Corten / Weathering), while IS 1570 (Part 6) 60T6 is classified under Tool & Die Steels — a different category, which is worth noting alongside the chemistry match below. ASTM A588 is defined under ASTM International, originating from United States, while IS 1570 (Part 6) 60T6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, ASTM A588 vs IS 1570 (Part 6) 60T6 is a 64.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 64.7%.

Frequently Compared With ASTM A588:
EN 10025-5 S355J2W CSA G40.21 350A ASTM A588 Grade A AS/NZS 3678 Grade 350WR EN 10025-5 S355J0WP JIS G3114 SMA400 CSA G40.21 260WT EN 10025-5 S355J2WP CSA G40.21 50W ASTM A588 Grade B ASTM A709 Grade HPS 70W CSA G40.21 480A
Match Breakdown
CHEMISTRY MATCH
64.7%
MECHANICAL MATCH
No shared data
OVERALL
64.7%
Specifications
Property ASTM A588 IS 1570 (Part 6) 60T6
Standard ASTM A588 IS 1570 (Part 6):1996
Category Structural Steel (Corten / Weathering) Tool & Die Steels
C (%) 0.19 max 0.55-0.65
Mn (%) 0.80-1.25 0.50-0.80
Si (%) 0.30-0.65 0.10-0.35
Cu (%) 0.20-0.40 <=0.25
Cr (%) 0.40-0.70 <=0.20
Ni (%) 0.40 max <=0.25
P (%) 0.04 max <=0.035
S (%) 0.05 max <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A588 IS 1570 (Part 6) 60T6
Tensile Strength 485-630 MPa Not specified
Yield Strength 345 MPa min Not specified
Elongation 18-21% Not specified
Hardness 140-190 HB Not specified
Typical Applications
ASTM A588
Used for bridges, railway wagons, transmission poles, architectural structures, containers, and outdoor construction.
IS 1570 (Part 6) 60T6
Not documented
Key Differences
Can ASTM A588 Be Substituted With IS 1570 (Part 6) 60T6?
ASTM A588 and IS 1570 (Part 6) 60T6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A588
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2700 mm (98.43–106.3 in)
IS 1570 (Part 6) 60T6
No active listings currently.
On M-EX Right Now
ASTM A588
2 active listings and RFQs →
IS 1570 (Part 6) 60T6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A588 and IS 1570 (Part 6) 60T6?
Different category: ASTM A588 is Structural Steel (Corten / Weathering), IS 1570 (Part 6) 60T6 is Tool & Die Steels.
Can ASTM A588 be substituted with IS 1570 (Part 6) 60T6?
ASTM A588 and IS 1570 (Part 6) 60T6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.