Post Stock Login Register

ASTM A959 S41428 vs ASTM A959 .-

Minimal Match — 34.6% match based on chemical composition and mechanical property overlap.

ASTM A959 S41428 (ASTM A959:2011) and ASTM A959 .- (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S41428 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 .- is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S41428 is defined under ASTM International, originating from United States, while ASTM A959 .- is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S41428 vs ASTM A959 .- is a 34.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 34.6%.

Frequently Compared With ASTM A959 S41428:
IS 1570 (Part 7) 12Cr12Ni2Mo EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
34.6%
MECHANICAL MATCH
No shared data
OVERALL
34.6%
Specifications
Property ASTM A959 S41428 ASTM A959 .-
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
Al (%) <=0.025 Not specified
C (%) 0.10-0.17 <=0.030
Cr (%) 11.3-12.7 18.0-20.0
Cu (%) <=0.15 Not specified
Mn (%) 0.65-1.05 <=1.00
Mo (%) 1.50-2.00 Not specified
N (%) 0.020-0.045 <=0.030
Ni (%) 2.3-3.2 <=0.50
P (%) <=0.020 <=0.040
S (%) <=0.015 <=0.030
Si (%) 0.10-0.35 <=1.00
Sn (%) <=0.05 Not specified
Ti (%) <=0.05 0.07-0.30
V (%) 0.25-0.40 Not specified
W (%) <=0.10 Not specified
Cb (%) Not specified 0.10-0.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S41428
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 .-
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 S41428 Be Substituted With ASTM A959 .-?
ASTM A959 S41428 and ASTM A959 .- share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S41428
0 active listings and RFQs →
ASTM A959 .-
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S41428 and ASTM A959 .-?
ASTM A959 S41428 specifies Al, Cu, Mo, Sn which are not specified for ASTM A959 .-. ASTM A959 .- specifies Cb which is not specified for ASTM A959 S41428.
Can ASTM A959 S41428 be substituted with ASTM A959 .-?
ASTM A959 S41428 and ASTM A959 .- share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.