Post Stock Login Register

ASTM A959:2011 S41603 Steel: Specifications & Listings

ASTM A959:2011 S41603: Ferritic stainless steel grade (UNS S41603) with the composition limits of ASTM A959-11. Carbon up to 0.08% and chromium 12.0-14.0%.

Category: Stainless Steel
Grade Details
GradeASTM A959:2011 S41603
Standard ASTM A959:2011
ApplicationsWrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
EN 10088-1 X6Cr13 EN 10088-1:2014 Europe (CEN) No activity yet
EN 10088-3 X6Cr13 EN 10088-3:2014 Europe No activity yet
EN 10088-1 X6CrAl13 EN 10088-1:2014 Europe (CEN) No activity yet
EN 10088-2 X6CrAl13 EN 10088-2:2014 Europe No activity yet
IS 1570 (Part 5) X04Cr12 IS 1570 (Part 5):1985 India No activity yet
ASTM A959 XM-6 ASTM A959:2011 USA No activity yet
EN 10088-1 X10CrAlSi13 EN 10088-1:2014 Europe (CEN) No activity yet
EN 10088-3 X15Cr13 EN 10088-3:2014 Europe No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A959 416 ASTM A959:2011 Strong Match
EN 10088-1 X6Cr13 EN 10088-1:2014 Strong Match
EN 10088-1 X6Cr13 EN 10088-1:2023 Strong Match
EN 10088-3 X6Cr13 EN 10088-3:2014 Strong Match
EN 10088-2 X6Cr13 EN 10088-2:2014 Strong Match
ASTM A959 416Se ASTM A959:2011 Strong Match
EN 10088-1 X6CrAl13 EN 10088-1:2014 Strong Match
EN 10088-1 X6CrAl13 EN 10088-1:2023 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Cr Mn P S Si
<=0.08 12.0-14.0 <=1.25 <=0.06 >=0.15 <=1.00

More data from ASTM A959:2011

From the standard
Other composition limits from Table 1 and its footnotes
UNS number
S41603
Metallurgical class
Ferritic grade: body-centered cubic, little or no tempered martensite, hardenable only slightly by cold working
Type
No type number is printed; the grade is identified by its UNS number only
Values
Maximum unless a range or minimum is shown; where two limits are shown for the same element in one grade the more stringent applies
These are the recommended composition limits of the A959 guide, intended for adoption by standards for stainless steel products; they are not a product specification.
Source: ASTM A959:2011, Table 1 and its footnotes

Active ASTM A959:2011 S41603 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A959:2011 S41603 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A959:2011 S41603

+ Post an RFQ for this grade

No open buyer requirements for ASTM A959:2011 S41603 at this time.

Register for Alerts