Post Stock Login Register

CSA G40.21 260W vs IS 2062 E250B0

Related Material — 65.3% match based on chemical composition and mechanical property overlap.

CSA G40.21 260W (CSA G40.21-13 (R2023)) and IS 2062 E250B0 (IS 2062:2011) are both steel grades. Both fall under the Structural Steel category. CSA G40.21 260W is typically used for bridges, buildings, general structural fabrication, storage tanks, older infrastructure projects., while IS 2062 E250B0 is commonly used for structural sections, welded structures, bridges, transmission towers, industrial fabrication, engineering structures. CSA G40.21 260W is defined under Canadian Standards Association (CSA), originating from Canada, while IS 2062 E250B0 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, CSA G40.21 260W vs IS 2062 E250B0 is a 98% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 65.3%.

Frequently Compared With CSA G40.21 260W:
AS/NZS 1595 C450 IS 2062 E250A CSA G40.21 350W ASTM A283C GOST 19281 09G2S AS/NZS 1595 C350 CSA G40.21 400A ASTM A1008 SS Grade 80 CSA G40.21 300W ASTM A572 Grade 50 ASTM A572 Gr.65 AS/NZS 3679.1 300
Match Breakdown
CHEMISTRY MATCH
98%
MECHANICAL MATCH
0%
OVERALL
65.3%
Specifications
Property CSA G40.21 260W IS 2062 E250B0
Standard CSA G40.21-13 (R2023) IS 2062:2011
Category Structural Steel Structural Steel
C (%) max 0.23 <=0.22
Mn (%) max 1.4 <=1.50
Si (%) max 0.4 <=0.40
P (%) max 0.035 <=0.045
S (%) max 0.035 <=0.045
CEV (%) Not specified <=0.41
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property CSA G40.21 260W IS 2062 E250B0
Yield Strength 260 MPa min 250 MPa (<=20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm)
Tensile Strength 410-590 MPa >=410 MPa
Elongation Not specified >=23%
Impact Energy Not specified >=27 J at 0°C
Typical Applications
CSA G40.21 260W
Bridges, buildings, general structural fabrication, storage tanks, older infrastructure projects.
IS 2062 E250B0
structural sections, welded structures, bridges, transmission towers, industrial fabrication, engineering structures
Key Differences
Can CSA G40.21 260W Be Substituted With IS 2062 E250B0?
CSA G40.21 260W and IS 2062 E250B0 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
CSA G40.21 260W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3400–4000 mm (133.86–157.48 in)
IS 2062 E250B0
Angle → (6 listings)
Leg 1: 25–30 mm (0.98–1.18 in)
Leg 2: 20–25 mm (0.79–0.98 in)
Thickness: 3–5 mm (0.12–0.2 in)
On M-EX Right Now
CSA G40.21 260W
2 active listings and RFQs →
IS 2062 E250B0
6 active listings and RFQs →
Frequently Asked Questions
What is the difference between CSA G40.21 260W and IS 2062 E250B0?
IS 2062 E250B0 specifies CEV which is not specified for CSA G40.21 260W.
Can CSA G40.21 260W be substituted with IS 2062 E250B0?
CSA G40.21 260W and IS 2062 E250B0 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.