Strong Match — 92.1% match
based on chemical composition and mechanical property overlap.
EN 10025-2 S235JR (EN 10025-2:2019) and GB/T 700 Q235D (GB/T 700:2006) are both steel grades.
Both fall under the Structural Steel category.
EN 10025-2 S235JR is typically used for structural fabrication, bridges, buildings, general engineering, while GB/T 700 Q235D is commonly used for hot rolled structural sheets, strips, sections and bars for welding, riveting and bolting engineering.
EN 10025-2 S235JR is defined under European Standard (EN), originating from Europe, while GB/T 700 Q235D is defined under Guobiao Standards (GB/T), originating from China.
As per chemical composition, EN 10025-2 S235JR vs GB/T 700 Q235D is a 90.3% match.
As per mechanical properties, the match is 95.6%.
Combined, this makes them a strong match overall at 92.1%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10025-2 S235JR
GB/T 700 Q235D
Tensile Strength
360-510 MPa
370-500 MPa
Yield Strength
>=235 MPa
>=235 MPa
Elongation
>=26%
>=26%
Condition
Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces
Hot rolled, controlled rolled or normalized; yield up to 16 mm, elongation up to 40 mm (N/mm2 = MPa)
Typical Applications
EN 10025-2 S235JR
Structural fabrication, bridges, buildings, general engineering
GB/T 700 Q235D
Hot rolled structural sheets, strips, sections and bars for welding, riveting and bolting engineering
Key Differences
EN 10025-2 S235JR specifies N, Cu which are not specified for GB/T 700 Q235D.
GB/T 700 Q235D specifies Si which is not specified for EN 10025-2 S235JR.
Can EN 10025-2 S235JR Be Substituted With GB/T 700 Q235D?
EN 10025-2 S235JR and GB/T 700 Q235D overlap closely enough on chemistry and mechanical properties that GB/T 700 Q235D is often considered as a substitute for EN 10025-2 S235JR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10025-2 S235JR and GB/T 700 Q235D?
EN 10025-2 S235JR specifies N, Cu which are not specified for GB/T 700 Q235D. GB/T 700 Q235D specifies Si which is not specified for EN 10025-2 S235JR.
Can EN 10025-2 S235JR be substituted with GB/T 700 Q235D?
EN 10025-2 S235JR and GB/T 700 Q235D overlap closely enough on chemistry and mechanical properties that GB/T 700 Q235D is often considered as a substitute for EN 10025-2 S235JR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.