Post Stock Login Register

EN 10025-2 S250 vs AS/NZS 3679.1 350

Related Material — 68.8% match based on chemical composition and mechanical property overlap.

EN 10025-2 S250 (EN 10025-2:2019) and AS/NZS 3679.1 350 (AS/NZS 3679.1:2016) are both steel grades. Both fall under the Structural Steel category. EN 10025-2 S250 is typically used for used for fabricated structures, beams, support frames, machinery bases, towers, and construction components., while AS/NZS 3679.1 350 is commonly used for hot-rolled structural bars and sections for primary structural beams, columns, and framing. EN 10025-2 S250 is defined under European Standard (EN), originating from Europe, while AS/NZS 3679.1 350 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, EN 10025-2 S250 vs AS/NZS 3679.1 350 is a 97.4% match. As per mechanical properties, the match is 11.6%. Combined, this makes them a related material overall at 68.8%.

Frequently Compared With EN 10025-2 S250:
CSA G40.21 260W ASTM A283C CSA G40.21 400W CSA G40.21 480W CSA G40.21 300W AS/NZS 3679.1 300 CSA G40.21 400A ASTM A1008 SS Grade 80 GOST 19281 09G2S ASTM A572 Grade 50 ASTM A1008 SS Grade 50 CSA G40.21 350W
Match Breakdown
CHEMISTRY MATCH
97.4%
MECHANICAL MATCH
11.6%
OVERALL
68.8%
Specifications
Property EN 10025-2 S250 AS/NZS 3679.1 350
Standard EN 10025-2:2019 AS/NZS 3679.1:2016
Category Structural Steel Structural Steel
C (%) 0.20 max <=0.22
Mn (%) 1.50 max <=1.70
Si (%) 0.40 max <=0.50
P (%) 0.040 max <=0.040
S (%) 0.040 max <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-2 S250 AS/NZS 3679.1 350
Tensile Strength 410-560 MPa 480-640 MPa
Yield Strength 250 MPa min 350 MPa min
Elongation 22-25% 20% min
Hardness 120-170 HB Not specified
Typical Applications
EN 10025-2 S250
Used for fabricated structures, beams, support frames, machinery bases, towers, and construction components.
AS/NZS 3679.1 350
Hot-rolled structural bars and sections for primary structural beams, columns, and framing
Can EN 10025-2 S250 Be Substituted With AS/NZS 3679.1 350?
EN 10025-2 S250 and AS/NZS 3679.1 350 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-2 S250
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3300–3500 mm (129.92–137.8 in)
AS/NZS 3679.1 350
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3200 mm (114.17–125.98 in)
On M-EX Right Now
EN 10025-2 S250
2 active listings and RFQs →
AS/NZS 3679.1 350
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-2 S250 and AS/NZS 3679.1 350?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10025-2 S250 be substituted with AS/NZS 3679.1 350?
EN 10025-2 S250 and AS/NZS 3679.1 350 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.