Post Stock Login Register

EN 10025-3 S460JR vs EN 10025-2 S460J0

Strong Match — 95.5% match based on chemical composition and mechanical property overlap.

EN 10025-3 S460JR (EN 10025-3:2019) and EN 10025-2 S460J0 (EN 10025-2:2019) are both steel grades. Both fall under the Structural Steel category. EN 10025-3 S460JR is typically used for used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms., while EN 10025-2 S460J0 is commonly used for hot rolled products of structural steels. EN 10025-3 S460JR is defined under European Standard (EN), originating from Europe, while EN 10025-2 S460J0 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10025-3 S460JR vs EN 10025-2 S460J0 is a 94.1% match. As per mechanical properties, the match is 98.1%. Combined, this makes them a strong match overall at 95.5%.

Frequently Compared With EN 10025-3 S460JR:
CSA G40.21 480W CSA G40.21 400W CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 260W GOST 19281 09G2S AS/NZS 3679.1 300 CSA G40.21 350W CSA G40.21 400A ASTM A1008 SS Grade 50 ASTM A572 Gr.65 ASTM A283C
Match Breakdown
CHEMISTRY MATCH
94.1%
MECHANICAL MATCH
98.1%
OVERALL
95.5%
Specifications
Property EN 10025-3 S460JR EN 10025-2 S460J0
Standard EN 10025-3:2019 EN 10025-2:2019
Category Structural Steel Structural Steel
C (%) 0.20 max <=0.20
Si (%) 0.60 max <=0.55
Mn (%) 1.70 max <=1.70
P (%) 0.030 max <=0.030
S (%) 0.030 max <=0.030
Nb (%) 0.06 max <=0.05
V (%) 0.12 max <=0.13
Ti (%) 0.05 max <=0.05
N (%) Not specified <=0.025
Cu (%) Not specified <=0.55
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-3 S460JR EN 10025-2 S460J0
Tensile Strength 540-720 MPa 550-720 MPa
Yield Strength 460 MPa min >=460 MPa
Elongation 17% min >=17%
Hardness 180-230 HB Not specified
Condition Not specified Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces
Typical Applications
EN 10025-3 S460JR
Used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms.
EN 10025-2 S460J0
Hot rolled products of structural steels
Key Differences
Can EN 10025-3 S460JR Be Substituted With EN 10025-2 S460J0?
EN 10025-3 S460JR and EN 10025-2 S460J0 overlap closely enough on chemistry and mechanical properties that EN 10025-2 S460J0 is often considered as a substitute for EN 10025-3 S460JR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
EN 10025-3 S460JR
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2500 mm (98.43–98.43 in)
EN 10025-2 S460J0
No active listings currently.
On M-EX Right Now
EN 10025-3 S460JR
2 active listings and RFQs →
EN 10025-2 S460J0
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-3 S460JR and EN 10025-2 S460J0?
EN 10025-2 S460J0 specifies N, Cu which are not specified for EN 10025-3 S460JR.
Can EN 10025-3 S460JR be substituted with EN 10025-2 S460J0?
EN 10025-3 S460JR and EN 10025-2 S460J0 overlap closely enough on chemistry and mechanical properties that EN 10025-2 S460J0 is often considered as a substitute for EN 10025-3 S460JR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.