Post Stock Login Register

EN 10028-2 16Mo3 vs IS 4367 10Cr9Mo10

Minimal Match — 52% match based on chemical composition and mechanical property overlap.

EN 10028-2 16Mo3 (EN 10028-2:2017) and IS 4367 10Cr9Mo10 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. EN 10028-2 16Mo3 is defined under European Standard (EN), originating from Europe, while IS 4367 10Cr9Mo10 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10028-2 16Mo3 vs IS 4367 10Cr9Mo10 is a 64.2% match. As per mechanical properties, the match is 27.8%. Combined, this makes them a minimal match overall at 52%.

Frequently Compared With EN 10028-2 16Mo3:
IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
64.2%
MECHANICAL MATCH
27.8%
OVERALL
52%
Specifications
Property EN 10028-2 16Mo3 IS 4367 10Cr9Mo10
Standard EN 10028-2:2017 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.12-0.20 <=0.15
Si (%) <=0.35 <=0.50
Mn (%) 0.40-0.90 0.40-0.70
P (%) <=0.025 <=0.035
S (%) <=0.010 <=0.035
N (%) <=0.012 Not specified
Cr (%) <=0.30 2.00-2.50
Cu (%) <=0.30 Not specified
Mo (%) 0.25-0.35 0.90-1.10
Ni (%) <=0.30 <=0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10028-2 16Mo3 IS 4367 10Cr9Mo10
Tensile Strength 440-590 MPa 410-590 MPa
Yield Strength >=275 MPa 245 MPa min
Elongation >=22% >=18%
Condition Usual delivery condition normalized (+N), nominal thickness up to 16 mm; transverse direction, Yield Strength is ReH, Elongation is A Normalised and tempered, ruling section up to 50 mm
Izod Impact Not specified 55 J min
Hardness (soft annealed) Not specified <=187 HB
Typical Applications
EN 10028-2 16Mo3
Flat products for pressure purposes
IS 4367 10Cr9Mo10
Not documented
Key Differences
Can EN 10028-2 16Mo3 Be Substituted With IS 4367 10Cr9Mo10?
EN 10028-2 16Mo3 and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10028-2 16Mo3
0 active listings and RFQs →
IS 4367 10Cr9Mo10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10028-2 16Mo3 and IS 4367 10Cr9Mo10?
EN 10028-2 16Mo3 specifies N, Cu which are not specified for IS 4367 10Cr9Mo10.
Can EN 10028-2 16Mo3 be substituted with IS 4367 10Cr9Mo10?
EN 10028-2 16Mo3 and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.