Strong Match — 98.5% match
based on chemical composition and mechanical property overlap.
EN 10346 S350GD (EN 10346:2015) and AS/NZS 3678 Grade 350L0 (AS/NZS 3678:2016) are both steel grades.
Both fall under the Structural Steel category.
EN 10346 S350GD is typically used for continuous hot-dip galvanized structural steel strip/sheet; roll-formed and cold-formed structural sections, purlins, roofing and cladding requiring corrosion protection, while AS/NZS 3678 Grade 350L0 is commonly used for refrigerated storage structures, cold climate construction, lng facility structural steel, antarctic research stations..
EN 10346 S350GD is defined under European Standard (EN), originating from Europe, while AS/NZS 3678 Grade 350L0 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.
As per chemical composition, EN 10346 S350GD vs AS/NZS 3678 Grade 350L0 is a 97.7% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 98.5%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can EN 10346 S350GD Be Substituted With AS/NZS 3678 Grade 350L0?
EN 10346 S350GD and AS/NZS 3678 Grade 350L0 overlap closely enough on chemistry and mechanical properties that AS/NZS 3678 Grade 350L0 is often considered as a substitute for EN 10346 S350GD in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10346 S350GD and AS/NZS 3678 Grade 350L0?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10346 S350GD be substituted with AS/NZS 3678 Grade 350L0?
EN 10346 S350GD and AS/NZS 3678 Grade 350L0 overlap closely enough on chemistry and mechanical properties that AS/NZS 3678 Grade 350L0 is often considered as a substitute for EN 10346 S350GD in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.