Post Stock Login Register

GB/T 700 Q235 vs EN 10025-2 E295

Related Material — 61% match based on chemical composition and mechanical property overlap.

GB/T 700 Q235 (GB/T 700-2006) and EN 10025-2 E295 (EN 10025-2:2019) are both steel grades. Both fall under the Structural Steel category. GB/T 700 Q235 is typically used for general structural fabrication, bridges, buildings, while EN 10025-2 E295 is commonly used for hot rolled products of structural steels. GB/T 700 Q235 is defined under Guobiao Standards (GB/T), originating from China, while EN 10025-2 E295 is defined under European Standard (EN), originating from Europe.

As per chemical composition, GB/T 700 Q235 vs EN 10025-2 E295 is a 91.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 61%.

Frequently Compared With GB/T 700 Q235:
GOST 19281 09G2S ASTM A1008 SS Grade 50 CSA G40.21 350W ASTM A572 Gr.65 ASTM A1008 SS Grade 80 CSA G40.21 300W CSA G40.21 400A CSA G40.21 400W AS/NZS 3679.1 300 AS/NZS 3679.1 350 ASTM A283C CSA G40.21 480W
Match Breakdown
CHEMISTRY MATCH
91.5%
MECHANICAL MATCH
0%
OVERALL
61%
Specifications
Property GB/T 700 Q235 EN 10025-2 E295
Standard GB/T 700-2006 EN 10025-2:2019
Category Structural Steel Structural Steel
C (%) ≤0.22 Not specified
Mn (%) 0.30–0.70 Not specified
Si (%) ≤0.35 Not specified
S (%) ≤0.050 <=0.045
P (%) ≤0.045 <=0.045
N (%) Not specified <=0.012
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 700 Q235 EN 10025-2 E295
Tensile Strength 375–500 MPa 470-610 MPa
Yield Strength ≥235 MPa >=295 MPa
Elongation ≥26% >=20%
Condition Not specified Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces
Typical Applications
GB/T 700 Q235
General structural fabrication, bridges, buildings
EN 10025-2 E295
Hot rolled products of structural steels
Key Differences
Can GB/T 700 Q235 Be Substituted With EN 10025-2 E295?
GB/T 700 Q235 and EN 10025-2 E295 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 700 Q235
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3100–3700 mm (122.05–145.67 in)
EN 10025-2 E295
No active listings currently.
On M-EX Right Now
GB/T 700 Q235
2 active listings and RFQs →
EN 10025-2 E295
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 700 Q235 and EN 10025-2 E295?
GB/T 700 Q235 specifies C, Mn, Si which are not specified for EN 10025-2 E295. EN 10025-2 E295 specifies N which is not specified for GB/T 700 Q235.
Can GB/T 700 Q235 be substituted with EN 10025-2 E295?
GB/T 700 Q235 and EN 10025-2 E295 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.