Post Stock Login Register

IS 11169 (Part 2) X04Cr17Ni12Mo2Ti vs IS 1570 (Part 7) 12Cr12MoH

Minimal Match — 41.9% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 2) X04Cr17Ni12Mo2Ti (IS 11169 (Part 2):1989) and IS 1570 (Part 7) 12Cr12MoH (IS 1570 (Part 7):1992) are both steel grades. Both fall under the Stainless Steel category. IS 11169 (Part 2) X04Cr17Ni12Mo2Ti is typically used for cold heading and cold extrusion; the standard covers wires, wire rods and bars (clause 1.1), while IS 1570 (Part 7) 12Cr12MoH is commonly used for boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature. IS 11169 (Part 2) X04Cr17Ni12Mo2Ti is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 7) 12Cr12MoH is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 11169 (Part 2) X04Cr17Ni12Mo2Ti vs IS 1570 (Part 7) 12Cr12MoH is a 59.9% match. As per mechanical properties, the match is 6.1%. Combined, this makes them a minimal match overall at 41.9%.

Frequently Compared With IS 11169 (Part 2) X04Cr17Ni12Mo2Ti:
ASTM A959 16-8-2H EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr13H GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
59.9%
MECHANICAL MATCH
6.1%
OVERALL
41.9%
Specifications
Property IS 11169 (Part 2) X04Cr17Ni12Mo2Ti IS 1570 (Part 7) 12Cr12MoH
Standard IS 11169 (Part 2):1989 IS 1570 (Part 7):1992
Category Stainless Steel Stainless Steel
C (%) <=0.08 0.08-0.16
Si (%) <=1.0 <=0.60
Mn (%) <=2.0 0.40-1.00
Ni (%) 10.0-14.0 <=1.0
Cr (%) 16.0-18.0 11.5-13.00
Mo (%) 2.0-3.0 0.40-0.80
Ti (%) >=5xC, <=0.80 Not specified
S (%) <=0.030 <=0.035
P (%) <=0.045 <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 2) X04Cr17Ni12Mo2Ti IS 1570 (Part 7) 12Cr12MoH
Yield Strength (0.2% proof) >=225 MPa Not specified
Tensile Strength 500-750 MPa 680-880 MPa
Elongation >=40% >=20%
Impact (U-notch 5 mm) >=60 J Not specified
Condition Quenched reference test piece (Table 6 treatment) Bars, forgings, Q+T, thickness up to 75 (first row of Table 3)
Yield Strength Not specified >=490 MPa (0.2 % proof stress)
Typical Applications
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti
Cold heading and cold extrusion; the standard covers wires, wire rods and bars (clause 1.1)
IS 1570 (Part 7) 12Cr12MoH
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Key Differences
Can IS 11169 (Part 2) X04Cr17Ni12Mo2Ti Be Substituted With IS 1570 (Part 7) 12Cr12MoH?
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti and IS 1570 (Part 7) 12Cr12MoH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti
0 active listings and RFQs →
IS 1570 (Part 7) 12Cr12MoH
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 2) X04Cr17Ni12Mo2Ti and IS 1570 (Part 7) 12Cr12MoH?
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti specifies Ti which is not specified for IS 1570 (Part 7) 12Cr12MoH.
Can IS 11169 (Part 2) X04Cr17Ni12Mo2Ti be substituted with IS 1570 (Part 7) 12Cr12MoH?
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti and IS 1570 (Part 7) 12Cr12MoH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.