IS 1570 (Part 5):1985 X15Cr25N Steel: Specifications & Listings

IS 1570 (Part 5):1985 X15Cr25N: X15Cr25N: high alloy, stainless or heat-resisting steel. Specified in IS 1570 (Part 5):1985.

Category: Stainless Steel
Grade Details
GradeIS 1570 (Part 5):1985 X15Cr25N
Standard IS 1570 (Part 5):1985
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
EN 10088-1 X18CrN28 EN 10088-1:2014 Close Alternative
EN 10088-1 X18CrN28 EN 10088-1:2023 Close Alternative
EN 10088-1 X10CrAlSi25 EN 10088-1:2014 Close Alternative
EN 10088-1 X10CrAlSi25 EN 10088-1:2023 Close Alternative
ASTM A959 SS410 ASTM A959:2011 Related Material
IS 1570 (Part 5) X66Cr13 IS 1570 (Part 5):1985 Related Material
ASTM A959 S41603 ASTM A959:2011 Related Material
ASTM A959 429 ASTM A959:2011 Related Material
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Si Mn P S Cr N
<=0.20 <=1.0 <=1.5 <=0.045 <=0.030 23.0-27.0 <=0.25
Mechanical Properties
Tensile Strength >=515 MPa
Yield Strength >=275 MPa (0.2 % proof stress)
Elongation >=20% (50 mm)
Hardness <=217 HB
Condition Annealed, quenched or solution treated plates, sheets and strips (Table 2)

More data from IS 1570 (Part 5):1985

From the standard
Annealed, quenched or solution treated plates, sheets and strips 4 properties
Tensile strength, min
515 MPa
0.2 % proof stress, min
275 MPa
Elongation in 50 mm, min
20%
Brinell hardness, max
217 HB
Source: IS 1570 (Part 5):1985, Table 2
Annealed, quenched or solution treated bars and flats 5 properties
Tensile strength, min
490 MPa
0.2 % proof stress, min
280 MPa
Elongation in 50 mm, min
16%
Reduction of area, min
45%
Brinell hardness, max
212 HB
Source: IS 1570 (Part 5):1985, Table 3

Active IS 1570 (Part 5):1985 X15Cr25N Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active IS 1570 (Part 5):1985 X15Cr25N listings at this time.

Register for Alerts

Buyer RFQs for IS 1570 (Part 5):1985 X15Cr25N

+ Post an RFQ for this grade

No open buyer requirements for IS 1570 (Part 5):1985 X15Cr25N at this time.

Register for Alerts