Post Stock Login Register

IS 1570 (Part 5) X85Cr18Mo2V vs EN 10088-1 X105CrMo17

Close Alternative — 72.5% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 5) X85Cr18Mo2V (IS 1570 (Part 5):1985) and EN 10088-1 X105CrMo17 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. IS 1570 (Part 5) X85Cr18Mo2V is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X105CrMo17 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 1570 (Part 5) X85Cr18Mo2V vs EN 10088-1 X105CrMo17 is a 72.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 72.5%.

Frequently Compared With IS 1570 (Part 5) X85Cr18Mo2V:
GOST 5632 12Kh13 IS 1570 (Part 7) 12Cr12MoH GOST 5632 08X18H10 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr13H EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
72.5%
MECHANICAL MATCH
No shared data
OVERALL
72.5%
Specifications
Property IS 1570 (Part 5) X85Cr18Mo2V EN 10088-1 X105CrMo17
Standard IS 1570 (Part 5):1985 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.80-0.90 0.95-1.20
Si (%) <=1.0 <=1.00
Mn (%) <=1.5 <=1.00
P (%) <=0.045 <=0.040
S (%) <=0.035 <=0.015
Cr (%) 16.5-18.5 16.0-18.0
Mo (%) <=2.5 0.40-0.80
V (%) <=0.60 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 5) X85Cr18Mo2V EN 10088-1 X105CrMo17
Hardness 255-306 HB Not specified
Condition Valve steel, hardened and tempered (Table 6) Not specified
Key Differences
Can IS 1570 (Part 5) X85Cr18Mo2V Be Substituted With EN 10088-1 X105CrMo17?
IS 1570 (Part 5) X85Cr18Mo2V and EN 10088-1 X105CrMo17 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 1570 (Part 5) X85Cr18Mo2V
0 active listings and RFQs →
EN 10088-1 X105CrMo17
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 5) X85Cr18Mo2V and EN 10088-1 X105CrMo17?
IS 1570 (Part 5) X85Cr18Mo2V specifies V which is not specified for EN 10088-1 X105CrMo17.
Can IS 1570 (Part 5) X85Cr18Mo2V be substituted with EN 10088-1 X105CrMo17?
IS 1570 (Part 5) X85Cr18Mo2V and EN 10088-1 X105CrMo17 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.