Post Stock Login Register

IS 1570 (Part 7) 3Cr18Ni11H vs EN 10088-1 X2CrNi18-9

Strong Match — 86.7% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 7) 3Cr18Ni11H (IS 1570 (Part 7):1992) and EN 10088-1 X2CrNi18-9 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. IS 1570 (Part 7) 3Cr18Ni11H is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X2CrNi18-9 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 1570 (Part 7) 3Cr18Ni11H vs EN 10088-1 X2CrNi18-9 is a 86.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 86.7%.

Frequently Compared With IS 1570 (Part 7) 3Cr18Ni11H:
ASTM A959 201L ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH GOST 5632 06Kh23N28 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
86.7%
MECHANICAL MATCH
No shared data
OVERALL
86.7%
Specifications
Property IS 1570 (Part 7) 3Cr18Ni11H EN 10088-1 X2CrNi18-9
Standard IS 1570 (Part 7):1992 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.015
Cr (%) 17.00-19.00 17.5-19.5
Ni (%) 9.00-13.00 8.0-10.5
N (%) Not specified <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 7) 3Cr18Ni11H EN 10088-1 X2CrNi18-9
Tensile Strength 490-690 MPa Not specified
Yield Strength >=175 MPa (0.2 % proof stress) Not specified
Elongation >=30% Not specified
Condition Tubes, forgings, plates, Q, thickness - (first row of Table 3) Not specified
Typical Applications
IS 1570 (Part 7) 3Cr18Ni11H
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
EN 10088-1 X2CrNi18-9
Not documented
Key Differences
Can IS 1570 (Part 7) 3Cr18Ni11H Be Substituted With EN 10088-1 X2CrNi18-9?
IS 1570 (Part 7) 3Cr18Ni11H and EN 10088-1 X2CrNi18-9 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNi18-9 is often considered as a substitute for IS 1570 (Part 7) 3Cr18Ni11H in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 1570 (Part 7) 3Cr18Ni11H
0 active listings and RFQs →
EN 10088-1 X2CrNi18-9
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 7) 3Cr18Ni11H and EN 10088-1 X2CrNi18-9?
EN 10088-1 X2CrNi18-9 specifies N which is not specified for IS 1570 (Part 7) 3Cr18Ni11H.
Can IS 1570 (Part 7) 3Cr18Ni11H be substituted with EN 10088-1 X2CrNi18-9?
IS 1570 (Part 7) 3Cr18Ni11H and EN 10088-1 X2CrNi18-9 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNi18-9 is often considered as a substitute for IS 1570 (Part 7) 3Cr18Ni11H in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.