Post Stock Login Register

IS 4367 07Cr4Mo6 vs BS 970 (Part 3) 826M31

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 4367 07Cr4Mo6 (IS 4367:1991) and BS 970 (Part 3) 826M31 (BS 970 (Part 3):1991) are both steel grades. Both fall under the Alloy Steel category. IS 4367 07Cr4Mo6 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 3) 826M31 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 4367 07Cr4Mo6 vs BS 970 (Part 3) 826M31 is a 71.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 4367 07Cr4Mo6:
IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 7) 12Cr2Mo5V2H IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6 IS 11169 (Part 1) 10Ni5Cr4 IS 1570 (Part 7) 12Cr4Mo5H UNI 11234 100Cr6 GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 103Cr4
Match Breakdown
CHEMISTRY MATCH
71.5%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property IS 4367 07Cr4Mo6 BS 970 (Part 3) 826M31
Standard IS 4367:1991 BS 970 (Part 3):1991
Category Alloy Steel Alloy Steel
C (%) <=0.12 0.27-0.35
Si (%) 0.15-0.60 0.10-0.40
Mn (%) 0.40-0.70 0.45-0.70
Ni (%) <=0.30 2.30-2.80
Cr (%) 0.70-1.10 0.50-0.80
Mo (%) 0.45-0.65 0.45-0.65
S (%) <=0.035 <=0.040
P (%) <=0.035 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 4367 07Cr4Mo6 BS 970 (Part 3) 826M31
Tensile Strength 380-550 MPa Not specified
Yield Strength 225 MPa min Not specified
Elongation >=19% Not specified
Izod Impact 60 J min Not specified
Hardness (soft annealed) <=170 HB Not specified
Condition Normalised and tempered, ruling section up to 40 mm Not specified
Typical Applications
IS 4367 07Cr4Mo6
Not documented
BS 970 (Part 3) 826M31
Bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; alloy direct hardening steel (Table 16)
Can IS 4367 07Cr4Mo6 Be Substituted With BS 970 (Part 3) 826M31?
IS 4367 07Cr4Mo6 and BS 970 (Part 3) 826M31 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 4367 07Cr4Mo6
0 active listings and RFQs →
BS 970 (Part 3) 826M31
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 4367 07Cr4Mo6 and BS 970 (Part 3) 826M31?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 4367 07Cr4Mo6 be substituted with BS 970 (Part 3) 826M31?
IS 4367 07Cr4Mo6 and BS 970 (Part 3) 826M31 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.