Post Stock Login Register

JIS G4303 SUS316 vs GB/T 3280 06Cr19Ni10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

JIS G4303 SUS316 (JIS G4303:2021) and GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) are both steel grades. Both fall under the Stainless Steel category. JIS G4303 SUS316 is typically used for marine applications, chemical processing, pharmaceutical equipment, while GB/T 3280 06Cr19Ni10 is commonly used for used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.. JIS G4303 SUS316 is defined under Japanese Industrial Standards (JIS), originating from Japan, while GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, JIS G4303 SUS316 vs GB/T 3280 06Cr19Ni10 is a 61.2% match. As per mechanical properties, the match is 25%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With JIS G4303 SUS316:
EN 10088-1 1.4401 GOST 5632 08X18H10 EN 10088-1 1.4006 GOST 5632 12Kh13 GOST 5632 06Kh23N28 EN 10088-1 1.4301 EN 10088-1 1.4845 ASTM A959 .- IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
61.2%
MECHANICAL MATCH
25%
OVERALL
35%
Specifications
Property JIS G4303 SUS316 GB/T 3280 06Cr19Ni10
Standard JIS G4303:2021 GB/T 3280-2015
Category Stainless Steel Stainless Steel
C (%) ≤0.08 0.08 max
Si (%) ≤1.00 1.00 max
Mn (%) ≤2.00 2.00 max
Cr (%) 16.0–18.0 18.00-20.00
Ni (%) 10.0–14.0 8.00-11.00
Mo (%) 2.0–3.0 Not specified
P (%) Not specified 0.045 max
S (%) Not specified 0.030 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4303 SUS316 GB/T 3280 06Cr19Ni10
Tensile Strength ≥520 MPa 520-720 MPa
Yield Strength ≥205 MPa 205-310 MPa
Elongation ≥40% 40-60%
Hardness ≤187 HB 187 HB max
Typical Applications
JIS G4303 SUS316
Marine applications, chemical processing, pharmaceutical equipment
GB/T 3280 06Cr19Ni10
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
Key Differences
Can JIS G4303 SUS316 Be Substituted With GB/T 3280 06Cr19Ni10?
JIS G4303 SUS316 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4303 SUS316
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2800–3300 mm (110.24–129.92 in)
GB/T 3280 06Cr19Ni10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2900–3300 mm (114.17–129.92 in)
On M-EX Right Now
JIS G4303 SUS316
3 active listings and RFQs →
GB/T 3280 06Cr19Ni10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4303 SUS316 and GB/T 3280 06Cr19Ni10?
JIS G4303 SUS316 specifies Mo which is not specified for GB/T 3280 06Cr19Ni10. GB/T 3280 06Cr19Ni10 specifies P, S which are not specified for JIS G4303 SUS316.
Can JIS G4303 SUS316 be substituted with GB/T 3280 06Cr19Ni10?
JIS G4303 SUS316 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.