Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
JIS G4303 SUS410 (JIS G4303:2021) and EN 10088-1 1.4845 (EN 10088-1:2014) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4303 SUS410 is typically used for cutlery, surgical instruments, turbine blades, fasteners, while EN 10088-1 1.4845 is commonly used for furnace parts, heat exchangers, kiln components.
JIS G4303 SUS410 is defined under Japanese Industrial Standards (JIS), originating from Japan, while EN 10088-1 1.4845 is defined under European Standard (EN), originating from Europe.
As per chemical composition, JIS G4303 SUS410 vs EN 10088-1 1.4845 is a 83.3% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
JIS G4303 SUS410 specifies P, S which are not specified for EN 10088-1 1.4845.
Can JIS G4303 SUS410 Be Substituted With EN 10088-1 1.4845?
JIS G4303 SUS410 and EN 10088-1 1.4845 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between JIS G4303 SUS410 and EN 10088-1 1.4845?
JIS G4303 SUS410 specifies P, S which are not specified for EN 10088-1 1.4845.
Can JIS G4303 SUS410 be substituted with EN 10088-1 1.4845?
JIS G4303 SUS410 and EN 10088-1 1.4845 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.