Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
JIS G4303 SUS410 (JIS G4303:2021) and GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4303 SUS410 is typically used for cutlery, surgical instruments, turbine blades, fasteners, while GB/T 3280 06Cr19Ni10 is commonly used for used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners..
JIS G4303 SUS410 is defined under Japanese Industrial Standards (JIS), originating from Japan, while GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T), originating from China.
As per chemical composition, JIS G4303 SUS410 vs GB/T 3280 06Cr19Ni10 is a 68.1% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
Can JIS G4303 SUS410 Be Substituted With GB/T 3280 06Cr19Ni10?
JIS G4303 SUS410 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between JIS G4303 SUS410 and GB/T 3280 06Cr19Ni10?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4303 SUS410 be substituted with GB/T 3280 06Cr19Ni10?
JIS G4303 SUS410 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.