Post Stock Login Register

CSA G40.21 350W vs IS 2062 E250A

Related Material — 63.6% match based on chemical composition and mechanical property overlap.

CSA G40.21 350W (CSA G40.21-13 (R2023)) and IS 2062 E250A (IS 2062:2011) are both steel grades. Both fall under the Structural Steel category. CSA G40.21 350W is typically used for used in buildings, bridges, cranes, transmission towers, heavy equipment, and structural fabrications., while IS 2062 E250A is commonly used for structural fabrication, bridges, industrial sheds, machinery frames, general engineering components, plates, welded structures. CSA G40.21 350W is defined under Canadian Standards Association (CSA), originating from Canada, while IS 2062 E250A is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, CSA G40.21 350W vs IS 2062 E250A is a 95.3% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 63.6%.

Frequently Compared With CSA G40.21 350W:
AS/NZS 3679.1 350 IS 2062 E250B0 CSA G40.21 480W AS/NZS 1595 C350 AS/NZS 1595 C450 CSA G40.21 400A CSA G40.21 260W CSA G40.21 400W GOST 19281 09G2S ASTM A572 Gr.65 ASTM A1008 SS Grade 80 ASTM A572 Grade 50
Match Breakdown
CHEMISTRY MATCH
95.3%
MECHANICAL MATCH
0%
OVERALL
63.6%
Specifications
Property CSA G40.21 350W IS 2062 E250A
Standard CSA G40.21-13 (R2023) IS 2062:2011
Category Structural Steel Structural Steel
C (%) 0.23 max <=0.23
Mn (%) 0.50-1.50 <=1.50
Si (%) 0.15-0.40 <=0.40
P (%) 0.040 max <=0.045
S (%) 0.050 max <=0.045
CEV (%) Not specified <=0.42
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property CSA G40.21 350W IS 2062 E250A
Tensile Strength 450-620 MPa >=410 MPa
Yield Strength 350 MPa min 250 MPa (<=20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm)
Elongation 20% min >=23%
Hardness 135-180 HB Not specified
Impact Not specified not required
Typical Applications
CSA G40.21 350W
Used in buildings, bridges, cranes, transmission towers, heavy equipment, and structural fabrications.
IS 2062 E250A
structural fabrication, bridges, industrial sheds, machinery frames, general engineering components, plates, welded structures
Key Differences
Can CSA G40.21 350W Be Substituted With IS 2062 E250A?
CSA G40.21 350W and IS 2062 E250A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
CSA G40.21 350W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–3400 mm (106.3–133.86 in)
IS 2062 E250A
Plate → (6 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2800–3600 mm (110.24–141.73 in)
Angle → (6 listings)
Leg 1: 75–90 mm (2.95–3.54 in)
Leg 2: 60–75 mm (2.36–2.95 in)
Thickness: 6–6 mm (0.24–0.24 in)
Flat Bar → (3 listings)
Thickness: 12–12 mm (0.47–0.47 in)
Width: 100–100 mm (3.94–3.94 in)
Length: 5400–7000 mm (212.6–275.59 in)
On M-EX Right Now
CSA G40.21 350W
2 active listings and RFQs →
IS 2062 E250A
15 active listings and RFQs →
Frequently Asked Questions
What is the difference between CSA G40.21 350W and IS 2062 E250A?
IS 2062 E250A specifies CEV which is not specified for CSA G40.21 350W.
Can CSA G40.21 350W be substituted with IS 2062 E250A?
CSA G40.21 350W and IS 2062 E250A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.