Post Stock Login Register

EN 10025-2 E295 vs GB/T 700 Q235

Related Material — 61% match based on chemical composition and mechanical property overlap.

EN 10025-2 E295 (EN 10025-2:2019) and GB/T 700 Q235 (GB/T 700-2006) are both steel grades. Both fall under the Structural Steel category. EN 10025-2 E295 is typically used for hot rolled products of structural steels, while GB/T 700 Q235 is commonly used for general structural fabrication, bridges, buildings. EN 10025-2 E295 is defined under European Standard (EN), originating from Europe, while GB/T 700 Q235 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, EN 10025-2 E295 vs GB/T 700 Q235 is a 91.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 61%.

Frequently Compared With EN 10025-2 E295:
GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 400A CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80 ASTM A283C
Match Breakdown
CHEMISTRY MATCH
91.5%
MECHANICAL MATCH
0%
OVERALL
61%
Specifications
Property EN 10025-2 E295 GB/T 700 Q235
Standard EN 10025-2:2019 GB/T 700-2006
Category Structural Steel Structural Steel
P (%) <=0.045 ≤0.045
S (%) <=0.045 ≤0.050
N (%) <=0.012 Not specified
C (%) Not specified ≤0.22
Mn (%) Not specified 0.30–0.70
Si (%) Not specified ≤0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-2 E295 GB/T 700 Q235
Tensile Strength 470-610 MPa 375–500 MPa
Yield Strength >=295 MPa ≥235 MPa
Elongation >=20% ≥26%
Condition Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces Not specified
Typical Applications
EN 10025-2 E295
Hot rolled products of structural steels
GB/T 700 Q235
General structural fabrication, bridges, buildings
Key Differences
Can EN 10025-2 E295 Be Substituted With GB/T 700 Q235?
EN 10025-2 E295 and GB/T 700 Q235 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-2 E295
No active listings currently.
GB/T 700 Q235
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3100–3700 mm (122.05–145.67 in)
On M-EX Right Now
EN 10025-2 E295
0 active listings and RFQs →
GB/T 700 Q235
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-2 E295 and GB/T 700 Q235?
EN 10025-2 E295 specifies N which is not specified for GB/T 700 Q235. GB/T 700 Q235 specifies C, Mn, Si which are not specified for EN 10025-2 E295.
Can EN 10025-2 E295 be substituted with GB/T 700 Q235?
EN 10025-2 E295 and GB/T 700 Q235 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.