Post Stock Login Register

EN 10025-2 E295 vs IS 1570 (Part 2/Sec 1) 2C2

Related Material — 65% match based on chemical composition and mechanical property overlap.

EN 10025-2 E295 (EN 10025-2:2019) and IS 1570 (Part 2/Sec 1) 2C2 (IS 1570 (Part 2/Sec 1):1979) are both steel grades. EN 10025-2 E295 is classified under Structural Steel, while IS 1570 (Part 2/Sec 1) 2C2 is classified under Carbon Steel — a different category, which is worth noting alongside the chemistry match below. EN 10025-2 E295 is defined under European Standard (EN), originating from Europe, while IS 1570 (Part 2/Sec 1) 2C2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10025-2 E295 vs IS 1570 (Part 2/Sec 1) 2C2 is a 92.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With EN 10025-2 E295:
GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 400A CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80 ASTM A283C
Match Breakdown
CHEMISTRY MATCH
92.3%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property EN 10025-2 E295 IS 1570 (Part 2/Sec 1) 2C2
Standard EN 10025-2:2019 IS 1570 (Part 2/Sec 1):1979
Category Structural Steel Carbon Steel
P (%) <=0.045 Not specified
S (%) <=0.045 Not specified
N (%) <=0.012 Not specified
C (%) Not specified <=0.05
Mn (%) Not specified <=0.40
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-2 E295 IS 1570 (Part 2/Sec 1) 2C2
Tensile Strength 470-610 MPa Not specified
Yield Strength >=295 MPa Not specified
Elongation >=20% Not specified
Condition Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces Not specified
Typical Applications
EN 10025-2 E295
Hot rolled products of structural steels
IS 1570 (Part 2/Sec 1) 2C2
Not documented
Key Differences
Can EN 10025-2 E295 Be Substituted With IS 1570 (Part 2/Sec 1) 2C2?
EN 10025-2 E295 and IS 1570 (Part 2/Sec 1) 2C2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10025-2 E295
0 active listings and RFQs →
IS 1570 (Part 2/Sec 1) 2C2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-2 E295 and IS 1570 (Part 2/Sec 1) 2C2?
Different category: EN 10025-2 E295 is Structural Steel, IS 1570 (Part 2/Sec 1) 2C2 is Carbon Steel. EN 10025-2 E295 specifies P, S, N which are not specified for IS 1570 (Part 2/Sec 1) 2C2. IS 1570 (Part 2/Sec 1) 2C2 specifies C, Mn which are not specified for EN 10025-2 E295.
Can EN 10025-2 E295 be substituted with IS 1570 (Part 2/Sec 1) 2C2?
EN 10025-2 E295 and IS 1570 (Part 2/Sec 1) 2C2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.