Post Stock Login Register

GOST 5632 06Kh23N28 vs BS 970 (Part 1) 304S11

Related Material — 67.9% match based on chemical composition and mechanical property overlap.

GOST 5632 06Kh23N28 (GOST 5632-2014) and BS 970 (Part 1) 304S11 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Stainless Steel category. GOST 5632 06Kh23N28 is typically used for furnace components, heat exchangers, high temperature applications, while BS 970 (Part 1) 304S11 is commonly used for austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (table 14, with table 15 for the cold drawn condition).. BS 970 (Part 1) 304S11 is defined under British Standards (BS) (United Kingdom).

As per chemical composition, GOST 5632 06Kh23N28 vs BS 970 (Part 1) 304S11 is a 67.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 67.9%.

Frequently Compared With GOST 5632 06Kh23N28:
EN 10088-1 1.4301 EN 10088-1 1.4845 EN 10088-1 1.4006 EN 10088-1 1.4401 ASTM A959 26-3-3 IS 1570 (Part 7) 12Cr12MoVH ASTM A959 29-4 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 16-8-2H ASTM A959 .- IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
67.9%
MECHANICAL MATCH
No shared data
OVERALL
67.9%
Specifications
Property GOST 5632 06Kh23N28 BS 970 (Part 1) 304S11
Standard GOST 5632-2014 BS 970 (Part 1):1983
Category Stainless Steel Stainless Steel
C (%) ≤0.06 <=0.030
Si (%) ≤0.80 <=1.0
Mn (%) ≤2.00 <=2.0
Cr (%) 22.0–25.0 17.0-19.0
Ni (%) 26.0–29.0 9.0-12.0
P (%) Not specified <=0.045
S (%) Not specified <=0.030
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 5632 06Kh23N28 BS 970 (Part 1) 304S11
Tensile Strength ≥510 MPa Not specified
Yield Strength ≥196 MPa Not specified
Elongation ≥35% Not specified
Max Service Temp 1050°C Not specified
Typical Applications
GOST 5632 06Kh23N28
Furnace components, heat exchangers, high temperature applications
BS 970 (Part 1) 304S11
Austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (Table 14, with Table 15 for the cold drawn condition).
Key Differences
Can GOST 5632 06Kh23N28 Be Substituted With BS 970 (Part 1) 304S11?
GOST 5632 06Kh23N28 and BS 970 (Part 1) 304S11 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 5632 06Kh23N28
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 3100–3400 mm (122.05–133.86 in)
BS 970 (Part 1) 304S11
No active listings currently.
On M-EX Right Now
GOST 5632 06Kh23N28
2 active listings and RFQs →
BS 970 (Part 1) 304S11
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 5632 06Kh23N28 and BS 970 (Part 1) 304S11?
BS 970 (Part 1) 304S11 specifies P, S which are not specified for GOST 5632 06Kh23N28.
Can GOST 5632 06Kh23N28 be substituted with BS 970 (Part 1) 304S11?
GOST 5632 06Kh23N28 and BS 970 (Part 1) 304S11 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.