Post Stock Login Register

GOST 5632 08X18H10 vs ASTM A959 202

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GOST 5632 08X18H10 (GOST 5632-2014) and ASTM A959 202 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. GOST 5632 08X18H10 is typically used for chemical equipment, food processing, general corrosion resistant applications, while ASTM A959 202 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 202 is defined under ASTM International (United States).

As per chemical composition, GOST 5632 08X18H10 vs ASTM A959 202 is a 69.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GOST 5632 08X18H10:
EN 10088-1 1.4301 EN 10088-1 1.4845 EN 10088-1 1.4006 EN 10088-1 1.4401 ASTM A959 201 ASTM A959 .- ASTM A959 16-8-2H IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 20Cr12MoNiVH ASTM A959 26-3-3 IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
69.3%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property GOST 5632 08X18H10 ASTM A959 202
Standard GOST 5632-2014 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) ≤0.08 <=0.15
Si (%) ≤0.80 <=1.00
Mn (%) ≤2.00 7.5-10.0
Cr (%) 17.0–19.0 17.0-19.0
Ni (%) 9.0–11.0 4.0-6.0
S (%) ≤0.020 <=0.030
P (%) ≤0.035 <=0.060
N (%) Not specified <=0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 5632 08X18H10 ASTM A959 202
Tensile Strength ≥520 MPa Not specified
Yield Strength ≥205 MPa Not specified
Elongation ≥40% Not specified
Typical Applications
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
ASTM A959 202
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can GOST 5632 08X18H10 Be Substituted With ASTM A959 202?
GOST 5632 08X18H10 and ASTM A959 202 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 5632 08X18H10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–2700 mm (98.43–106.3 in)
ASTM A959 202
No active listings currently.
On M-EX Right Now
GOST 5632 08X18H10
2 active listings and RFQs →
ASTM A959 202
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 5632 08X18H10 and ASTM A959 202?
ASTM A959 202 specifies N which is not specified for GOST 5632 08X18H10.
Can GOST 5632 08X18H10 be substituted with ASTM A959 202?
GOST 5632 08X18H10 and ASTM A959 202 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.