Strong Match — 97% match
based on chemical composition and mechanical property overlap.
GOST 5632 12Kh13 (GOST 5632-2014) and EN 10088-1 1.4006 (EN 10088-1:2014) are both steel grades.
Both fall under the Stainless Steel category.
GOST 5632 12Kh13 is typically used for turbine blades, pump shafts, fasteners, cutlery, while EN 10088-1 1.4006 is commonly used for cutlery, turbine blades, fasteners, surgical instruments.
EN 10088-1 1.4006 is defined under European Standard (EN) (Europe).
As per chemical composition, GOST 5632 12Kh13 vs EN 10088-1 1.4006 is a 95.5% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 97%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can GOST 5632 12Kh13 Be Substituted With EN 10088-1 1.4006?
GOST 5632 12Kh13 and EN 10088-1 1.4006 overlap closely enough on chemistry and mechanical properties that EN 10088-1 1.4006 is often considered as a substitute for GOST 5632 12Kh13 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between GOST 5632 12Kh13 and EN 10088-1 1.4006?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GOST 5632 12Kh13 be substituted with EN 10088-1 1.4006?
GOST 5632 12Kh13 and EN 10088-1 1.4006 overlap closely enough on chemistry and mechanical properties that EN 10088-1 1.4006 is often considered as a substitute for GOST 5632 12Kh13 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.