Post Stock Login Register

GOST 5632 12Kh13 vs ASTM A959 .-

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GOST 5632 12Kh13 (GOST 5632-2014) and ASTM A959 .- (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. GOST 5632 12Kh13 is typically used for turbine blades, pump shafts, fasteners, cutlery, while ASTM A959 .- is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 .- is defined under ASTM International (United States).

As per chemical composition, GOST 5632 12Kh13 vs ASTM A959 .- is a 55.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GOST 5632 12Kh13:
EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4301 EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H IS 1570 (Part 7) 20Cr12MoNiVH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12MoH GOST 5632 06Kh23N28
Match Breakdown
CHEMISTRY MATCH
55.8%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property GOST 5632 12Kh13 ASTM A959 .-
Standard GOST 5632-2014 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) 0.09–0.15 <=0.030
Si (%) ≤0.80 <=1.00
Mn (%) ≤0.80 <=1.00
Cr (%) 12.0–14.0 18.0-20.0
Ni (%) ≤0.60 <=0.50
Cb (%) Not specified 0.10-0.60
N (%) Not specified <=0.030
P (%) Not specified <=0.040
S (%) Not specified <=0.030
Ti (%) Not specified 0.07-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 5632 12Kh13 ASTM A959 .-
Tensile Strength ≥540 MPa (annealed) Not specified
Hardness HRC 36–45 (hardened) Not specified
Typical Applications
GOST 5632 12Kh13
Turbine blades, pump shafts, fasteners, cutlery
ASTM A959 .-
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can GOST 5632 12Kh13 Be Substituted With ASTM A959 .-?
GOST 5632 12Kh13 and ASTM A959 .- share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 5632 12Kh13
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2700–3400 mm (106.3–133.86 in)
ASTM A959 .-
No active listings currently.
On M-EX Right Now
GOST 5632 12Kh13
2 active listings and RFQs →
ASTM A959 .-
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 5632 12Kh13 and ASTM A959 .-?
ASTM A959 .- specifies Cb, N, P, S which are not specified for GOST 5632 12Kh13.
Can GOST 5632 12Kh13 be substituted with ASTM A959 .-?
GOST 5632 12Kh13 and ASTM A959 .- share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.