Post Stock Login Register

GOST 5632 12Kh13 vs GB/T 3280 06Cr19Ni10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GOST 5632 12Kh13 (GOST 5632-2014) and GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) are both steel grades. Both fall under the Stainless Steel category. GOST 5632 12Kh13 is typically used for turbine blades, pump shafts, fasteners, cutlery, while GB/T 3280 06Cr19Ni10 is commonly used for used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.. GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T) (China).

As per chemical composition, GOST 5632 12Kh13 vs GB/T 3280 06Cr19Ni10 is a 62.9% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GOST 5632 12Kh13:
EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4301 EN 10088-1 1.4845 ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 20Cr12MoNiVH IS 1570 (Part 7) 12Cr13H IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH GOST 5632 06Kh23N28
Match Breakdown
CHEMISTRY MATCH
62.9%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GOST 5632 12Kh13 GB/T 3280 06Cr19Ni10
Standard GOST 5632-2014 GB/T 3280-2015
Category Stainless Steel Stainless Steel
C (%) 0.09–0.15 0.08 max
Si (%) ≤0.80 1.00 max
Mn (%) ≤0.80 2.00 max
Cr (%) 12.0–14.0 18.00-20.00
Ni (%) ≤0.60 8.00-11.00
P (%) Not specified 0.045 max
S (%) Not specified 0.030 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 5632 12Kh13 GB/T 3280 06Cr19Ni10
Tensile Strength ≥540 MPa (annealed) 520-720 MPa
Hardness HRC 36–45 (hardened) Not specified
Yield Strength Not specified 205-310 MPa
Elongation Not specified 40-60%
Hardness Not specified 187 HB max
Typical Applications
GOST 5632 12Kh13
Turbine blades, pump shafts, fasteners, cutlery
GB/T 3280 06Cr19Ni10
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
Key Differences
Can GOST 5632 12Kh13 Be Substituted With GB/T 3280 06Cr19Ni10?
GOST 5632 12Kh13 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 5632 12Kh13
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2700–3400 mm (106.3–133.86 in)
GB/T 3280 06Cr19Ni10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2900–3300 mm (114.17–129.92 in)
On M-EX Right Now
GOST 5632 12Kh13
2 active listings and RFQs →
GB/T 3280 06Cr19Ni10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 5632 12Kh13 and GB/T 3280 06Cr19Ni10?
GB/T 3280 06Cr19Ni10 specifies P, S which are not specified for GOST 5632 12Kh13.
Can GOST 5632 12Kh13 be substituted with GB/T 3280 06Cr19Ni10?
GOST 5632 12Kh13 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.