Post Stock Login Register

IS 11169 (Part 2) X04Cr17Ni12Mo2Ti vs ASTM A959 316Cb

Strong Match — 97.2% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 2) X04Cr17Ni12Mo2Ti (IS 11169 (Part 2):1989) and ASTM A959 316Cb (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. IS 11169 (Part 2) X04Cr17Ni12Mo2Ti is typically used for cold heading and cold extrusion; the standard covers wires, wire rods and bars (clause 1.1), while ASTM A959 316Cb is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). IS 11169 (Part 2) X04Cr17Ni12Mo2Ti is defined under Bureau of Indian Standards (IS), originating from India, while ASTM A959 316Cb is defined under ASTM International, originating from United States.

As per chemical composition, IS 11169 (Part 2) X04Cr17Ni12Mo2Ti vs ASTM A959 316Cb is a 97.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 97.2%.

Frequently Compared With IS 11169 (Part 2) X04Cr17Ni12Mo2Ti:
ASTM A959 16-8-2H EN 10088-1 1.4845 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
97.2%
MECHANICAL MATCH
No shared data
OVERALL
97.2%
Specifications
Property IS 11169 (Part 2) X04Cr17Ni12Mo2Ti ASTM A959 316Cb
Standard IS 11169 (Part 2):1989 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.08 <=0.08
Si (%) <=1.0 <=1.00
Mn (%) <=2.0 <=2.00
Ni (%) 10.0-14.0 10.0-14.0
Cr (%) 16.0-18.0 16.0-18.0
Mo (%) 2.0-3.0 2.00-3.00
Ti (%) >=5xC, <=0.80 Not specified
S (%) <=0.030 <=0.030
P (%) <=0.045 <=0.045
N (%) Not specified <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 2) X04Cr17Ni12Mo2Ti ASTM A959 316Cb
Yield Strength (0.2% proof) >=225 MPa Not specified
Tensile Strength 500-750 MPa Not specified
Elongation >=40% Not specified
Impact (U-notch 5 mm) >=60 J Not specified
Condition Quenched reference test piece (Table 6 treatment) Not specified
Typical Applications
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti
Cold heading and cold extrusion; the standard covers wires, wire rods and bars (clause 1.1)
ASTM A959 316Cb
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can IS 11169 (Part 2) X04Cr17Ni12Mo2Ti Be Substituted With ASTM A959 316Cb?
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti and ASTM A959 316Cb overlap closely enough on chemistry and mechanical properties that ASTM A959 316Cb is often considered as a substitute for IS 11169 (Part 2) X04Cr17Ni12Mo2Ti in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti
0 active listings and RFQs →
ASTM A959 316Cb
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 2) X04Cr17Ni12Mo2Ti and ASTM A959 316Cb?
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti specifies Ti which is not specified for ASTM A959 316Cb. ASTM A959 316Cb specifies N which is not specified for IS 11169 (Part 2) X04Cr17Ni12Mo2Ti.
Can IS 11169 (Part 2) X04Cr17Ni12Mo2Ti be substituted with ASTM A959 316Cb?
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti and ASTM A959 316Cb overlap closely enough on chemistry and mechanical properties that ASTM A959 316Cb is often considered as a substitute for IS 11169 (Part 2) X04Cr17Ni12Mo2Ti in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.