Post Stock Login Register

IS 11169 (Part 2) X04Cr17Ni12Mo2Ti vs BS 970 (Part 1) 320S31

Strong Match — 90.4% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 2) X04Cr17Ni12Mo2Ti (IS 11169 (Part 2):1989) and BS 970 (Part 1) 320S31 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Stainless Steel category. IS 11169 (Part 2) X04Cr17Ni12Mo2Ti is typically used for cold heading and cold extrusion; the standard covers wires, wire rods and bars (clause 1.1), while BS 970 (Part 1) 320S31 is commonly used for austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (table 14, with table 15 for the cold drawn condition).. IS 11169 (Part 2) X04Cr17Ni12Mo2Ti is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 1) 320S31 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 11169 (Part 2) X04Cr17Ni12Mo2Ti vs BS 970 (Part 1) 320S31 is a 90.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 90.4%.

Frequently Compared With IS 11169 (Part 2) X04Cr17Ni12Mo2Ti:
ASTM A959 16-8-2H EN 10088-1 1.4845 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
90.4%
MECHANICAL MATCH
No shared data
OVERALL
90.4%
Specifications
Property IS 11169 (Part 2) X04Cr17Ni12Mo2Ti BS 970 (Part 1) 320S31
Standard IS 11169 (Part 2):1989 BS 970 (Part 1):1983
Category Stainless Steel Stainless Steel
C (%) <=0.08 <=0.08
Si (%) <=1.0 <=1.0
Mn (%) <=2.0 <=2.0
Ni (%) 10.0-14.0 11.0-14.0
Cr (%) 16.0-18.0 16.5-18.5
Mo (%) 2.0-3.0 2.00-2.50
Ti (%) >=5xC, <=0.80 5C-0.80
S (%) <=0.030 <=0.030
P (%) <=0.045 <=0.045
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 2) X04Cr17Ni12Mo2Ti BS 970 (Part 1) 320S31
Yield Strength (0.2% proof) >=225 MPa Not specified
Tensile Strength 500-750 MPa Not specified
Elongation >=40% Not specified
Impact (U-notch 5 mm) >=60 J Not specified
Condition Quenched reference test piece (Table 6 treatment) Not specified
Typical Applications
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti
Cold heading and cold extrusion; the standard covers wires, wire rods and bars (clause 1.1)
BS 970 (Part 1) 320S31
Austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (Table 14, with Table 15 for the cold drawn condition).
Can IS 11169 (Part 2) X04Cr17Ni12Mo2Ti Be Substituted With BS 970 (Part 1) 320S31?
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti and BS 970 (Part 1) 320S31 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 320S31 is often considered as a substitute for IS 11169 (Part 2) X04Cr17Ni12Mo2Ti in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti
0 active listings and RFQs →
BS 970 (Part 1) 320S31
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 2) X04Cr17Ni12Mo2Ti and BS 970 (Part 1) 320S31?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 11169 (Part 2) X04Cr17Ni12Mo2Ti be substituted with BS 970 (Part 1) 320S31?
IS 11169 (Part 2) X04Cr17Ni12Mo2Ti and BS 970 (Part 1) 320S31 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 320S31 is often considered as a substitute for IS 11169 (Part 2) X04Cr17Ni12Mo2Ti in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.