Post Stock Login Register

IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB vs ASTM A959 660

Strong Match — 100% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB (IS 11169 (Part 2):2023) and ASTM A959 660 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB is typically used for cold heading and cold extrusion of stainless steel parts; the standard covers wires, wire rods and bars of 0.8 to 50 mm (clause 1.1, table 11), while ASTM A959 660 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB is defined under Bureau of Indian Standards (IS), originating from India, while ASTM A959 660 is defined under ASTM International, originating from United States.

As per chemical composition, IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB vs ASTM A959 660 is a 100% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 100%.

Frequently Compared With IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB:
EN 10088-1 1.4301 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH GOST 5632 12Kh13 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
No shared data
OVERALL
100%
Specifications
Property IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB ASTM A959 660
Standard IS 11169 (Part 2):2023 ASTM A959:2011
Category Stainless Steel Stainless Steel
Al (%) <=0.35 <=0.35
B (%) 0.001-0.010 0.001-0.010
C (%) <=0.08 <=0.08
Cr (%) 13.5-16.0 13.5-16.0
Mn (%) <=2.00 <=2.00
Mo (%) 1.00-1.50 1.00-1.50
Ni (%) 24.0-27.0 24.0-27.0
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Ti (%) 1.90-2.35 1.90-2.35
V (%) 0.10-0.50 0.10-0.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB ASTM A959 660
Reduction of Area, cold drawn and solution annealed (+AT+C+AT) >=65% (0.8 to 5 mm) Not specified
Tensile Strength, cold drawn and solution annealed (+AT+C+AT) <=780 MPa (0.8 to 2 mm) / <=730 MPa (over 2 to 5 mm) Not specified
Typical Applications
IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB
Cold heading and cold extrusion of stainless steel parts; the standard covers wires, wire rods and bars of 0.8 to 50 mm (clause 1.1, Table 11)
ASTM A959 660
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB Be Substituted With ASTM A959 660?
IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB and ASTM A959 660 overlap closely enough on chemistry and mechanical properties that ASTM A959 660 is often considered as a substitute for IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB
0 active listings and RFQs →
ASTM A959 660
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB and ASTM A959 660?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB be substituted with ASTM A959 660?
IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB and ASTM A959 660 overlap closely enough on chemistry and mechanical properties that ASTM A959 660 is often considered as a substitute for IS 11169 (Part 2) X04Ni25Cr15Ti2Mo1VB in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.