Post Stock Login Register

JIS G4303 SUS316 vs BS 970 (Part 1) 316S11

Close Alternative — 75% match based on chemical composition and mechanical property overlap.

JIS G4303 SUS316 (JIS G4303:2021) and BS 970 (Part 1) 316S11 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Stainless Steel category. JIS G4303 SUS316 is typically used for marine applications, chemical processing, pharmaceutical equipment, while BS 970 (Part 1) 316S11 is commonly used for austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (table 14, with table 15 for the cold drawn condition).. JIS G4303 SUS316 is defined under Japanese Industrial Standards (JIS), originating from Japan, while BS 970 (Part 1) 316S11 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, JIS G4303 SUS316 vs BS 970 (Part 1) 316S11 is a 75% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 75%.

Frequently Compared With JIS G4303 SUS316:
EN 10088-1 1.4401 GOST 5632 08X18H10 GOST 5632 12Kh13 EN 10088-1 1.4006 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4301 EN 10088-1 1.4845 ASTM A959 .- IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
75%
MECHANICAL MATCH
No shared data
OVERALL
75%
Specifications
Property JIS G4303 SUS316 BS 970 (Part 1) 316S11
Standard JIS G4303:2021 BS 970 (Part 1):1983
Category Stainless Steel Stainless Steel
C (%) ≤0.08 <=0.030
Si (%) ≤1.00 <=1.0
Mn (%) ≤2.00 <=2.0
Cr (%) 16.0–18.0 16.5-18.5
Ni (%) 10.0–14.0 11.0-14.0
Mo (%) 2.0–3.0 2.00-2.50
P (%) Not specified <=0.045
S (%) Not specified <=0.030
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4303 SUS316 BS 970 (Part 1) 316S11
Tensile Strength ≥520 MPa Not specified
Yield Strength ≥205 MPa Not specified
Elongation ≥40% Not specified
Hardness ≤187 HB Not specified
Typical Applications
JIS G4303 SUS316
Marine applications, chemical processing, pharmaceutical equipment
BS 970 (Part 1) 316S11
Austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (Table 14, with Table 15 for the cold drawn condition).
Key Differences
Can JIS G4303 SUS316 Be Substituted With BS 970 (Part 1) 316S11?
JIS G4303 SUS316 and BS 970 (Part 1) 316S11 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
JIS G4303 SUS316
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2800–3300 mm (110.24–129.92 in)
BS 970 (Part 1) 316S11
No active listings currently.
On M-EX Right Now
JIS G4303 SUS316
3 active listings and RFQs →
BS 970 (Part 1) 316S11
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4303 SUS316 and BS 970 (Part 1) 316S11?
BS 970 (Part 1) 316S11 specifies P, S which are not specified for JIS G4303 SUS316.
Can JIS G4303 SUS316 be substituted with BS 970 (Part 1) 316S11?
JIS G4303 SUS316 and BS 970 (Part 1) 316S11 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.