Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
NF A35-574 Z7CN18-09 (NF A35-574:1990) and GOST 5632 06Kh23N28 (GOST 5632-2014) are both steel grades.
Both fall under the Stainless Steel category.
NF A35-574 Z7CN18-09 is typically used for used for food processing equipment, kitchen equipment, chemical tanks, piping, architectural components, and fasteners., while GOST 5632 06Kh23N28 is commonly used for furnace components, heat exchangers, high temperature applications.
NF A35-574 Z7CN18-09 is defined under Association Francaise de Normalisation (NF) (France).
As per chemical composition, NF A35-574 Z7CN18-09 vs GOST 5632 06Kh23N28 is a 68.1% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
NF A35-574 Z7CN18-09
GOST 5632 06Kh23N28
Tensile Strength
500-700 MPa
≥510 MPa
Yield Strength
190-250 MPa
≥196 MPa
Elongation
40-55%
≥35%
Hardness
140-210 HB
Not specified
Max Service Temp
Not specified
1050°C
Typical Applications
NF A35-574 Z7CN18-09
Used for food processing equipment, kitchen equipment, chemical tanks, piping, architectural components, and fasteners.
GOST 5632 06Kh23N28
Furnace components, heat exchangers, high temperature applications
Key Differences
NF A35-574 Z7CN18-09 specifies P, S which are not specified for GOST 5632 06Kh23N28.
Can NF A35-574 Z7CN18-09 Be Substituted With GOST 5632 06Kh23N28?
NF A35-574 Z7CN18-09 and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between NF A35-574 Z7CN18-09 and GOST 5632 06Kh23N28?
NF A35-574 Z7CN18-09 specifies P, S which are not specified for GOST 5632 06Kh23N28.
Can NF A35-574 Z7CN18-09 be substituted with GOST 5632 06Kh23N28?
NF A35-574 Z7CN18-09 and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.