Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
NF A35-574 Z7CN18-09 (NF A35-574:1990) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades.
Both fall under the Stainless Steel category.
NF A35-574 Z7CN18-09 is typically used for used for food processing equipment, kitchen equipment, chemical tanks, piping, architectural components, and fasteners., while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications.
NF A35-574 Z7CN18-09 is defined under Association Francaise de Normalisation (NF) (France).
As per chemical composition, NF A35-574 Z7CN18-09 vs GOST 5632 08X18H10 is a 80.6% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
NF A35-574 Z7CN18-09
GOST 5632 08X18H10
Tensile Strength
500-700 MPa
≥520 MPa
Yield Strength
190-250 MPa
≥205 MPa
Elongation
40-55%
≥40%
Hardness
140-210 HB
Not specified
Typical Applications
NF A35-574 Z7CN18-09
Used for food processing equipment, kitchen equipment, chemical tanks, piping, architectural components, and fasteners.
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
Can NF A35-574 Z7CN18-09 Be Substituted With GOST 5632 08X18H10?
NF A35-574 Z7CN18-09 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between NF A35-574 Z7CN18-09 and GOST 5632 08X18H10?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can NF A35-574 Z7CN18-09 be substituted with GOST 5632 08X18H10?
NF A35-574 Z7CN18-09 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.