Post Stock Login Register

EN 10025-2 E295 vs EN 10025-2 E360

Related Material — 66.7% match based on chemical composition and mechanical property overlap.

EN 10025-2 E295 (EN 10025-2:2019) and EN 10025-2 E360 (EN 10025-2:2019) are both steel grades. Both fall under the Structural Steel category. EN 10025-2 E295 is typically used for hot rolled products of structural steels, while EN 10025-2 E360 is commonly used for hot rolled products of structural steels. EN 10025-2 E295 is defined under European Standard (EN), originating from Europe, while EN 10025-2 E360 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10025-2 E295 vs EN 10025-2 E360 is a 100% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 66.7%.

Frequently Compared With EN 10025-2 E295:
GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 400A CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80 ASTM A283C
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
0%
OVERALL
66.7%
Specifications
Property EN 10025-2 E295 EN 10025-2 E360
Standard EN 10025-2:2019 EN 10025-2:2019
Category Structural Steel Structural Steel
P (%) <=0.045 <=0.045
S (%) <=0.045 <=0.045
N (%) <=0.012 <=0.012
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-2 E295 EN 10025-2 E360
Tensile Strength 470-610 MPa 670-830 MPa
Yield Strength >=295 MPa >=360 MPa
Elongation >=20% >=11%
Condition Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces
Typical Applications
EN 10025-2 E295
Hot rolled products of structural steels
EN 10025-2 E360
Hot rolled products of structural steels
Can EN 10025-2 E295 Be Substituted With EN 10025-2 E360?
EN 10025-2 E295 and EN 10025-2 E360 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10025-2 E295
0 active listings and RFQs →
EN 10025-2 E360
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-2 E295 and EN 10025-2 E360?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10025-2 E295 be substituted with EN 10025-2 E360?
EN 10025-2 E295 and EN 10025-2 E360 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.