Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
EN 10088-1 1.4006 (EN 10088-1:2014) and ASTM A959 202 (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 1.4006 is typically used for cutlery, turbine blades, fasteners, surgical instruments, while ASTM A959 202 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1).
EN 10088-1 1.4006 is defined under European Standard (EN), originating from Europe, while ASTM A959 202 is defined under ASTM International, originating from United States.
As per chemical composition, EN 10088-1 1.4006 vs ASTM A959 202 is a 62% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
ASTM A959 202 specifies N, P, S which are not specified for EN 10088-1 1.4006.
Can EN 10088-1 1.4006 Be Substituted With ASTM A959 202?
EN 10088-1 1.4006 and ASTM A959 202 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10088-1 1.4006 and ASTM A959 202?
ASTM A959 202 specifies N, P, S which are not specified for EN 10088-1 1.4006.
Can EN 10088-1 1.4006 be substituted with ASTM A959 202?
EN 10088-1 1.4006 and ASTM A959 202 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.