Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
EN 10088-1 1.4006 (EN 10088-1:2014) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 1.4006 is typically used for cutlery, turbine blades, fasteners, surgical instruments, while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications.
EN 10088-1 1.4006 is defined under European Standard (EN) (Europe).
As per chemical composition, EN 10088-1 1.4006 vs GOST 5632 08X18H10 is a 75% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical equipment, food processing, general corrosion resistant applications
Key Differences
GOST 5632 08X18H10 specifies S, P which are not specified for EN 10088-1 1.4006.
Can EN 10088-1 1.4006 Be Substituted With GOST 5632 08X18H10?
EN 10088-1 1.4006 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10088-1 1.4006 and GOST 5632 08X18H10?
GOST 5632 08X18H10 specifies S, P which are not specified for EN 10088-1 1.4006.
Can EN 10088-1 1.4006 be substituted with GOST 5632 08X18H10?
EN 10088-1 1.4006 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.