Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
EN 10088-1 1.4006 (EN 10088-1:2014) and EN 10088-1 1.4401 (EN 10088-1:2014) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 1.4006 is typically used for cutlery, turbine blades, fasteners, surgical instruments, while EN 10088-1 1.4401 is commonly used for marine, chemical processing, pharmaceutical equipment.
EN 10088-1 1.4006 is defined under European Standard (EN), originating from Europe, while EN 10088-1 1.4401 is defined under European Standard (EN), originating from Europe.
As per chemical composition, EN 10088-1 1.4006 vs EN 10088-1 1.4401 is a 66.7% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Marine, chemical processing, pharmaceutical equipment
Key Differences
EN 10088-1 1.4401 specifies Mo which is not specified for EN 10088-1 1.4006.
Can EN 10088-1 1.4006 Be Substituted With EN 10088-1 1.4401?
EN 10088-1 1.4006 and EN 10088-1 1.4401 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10088-1 1.4006 and EN 10088-1 1.4401?
EN 10088-1 1.4401 specifies Mo which is not specified for EN 10088-1 1.4006.
Can EN 10088-1 1.4006 be substituted with EN 10088-1 1.4401?
EN 10088-1 1.4006 and EN 10088-1 1.4401 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.