Strong Match — 97% match
based on chemical composition and mechanical property overlap.
EN 10088-1 1.4006 (EN 10088-1:2014) and GOST 5632 12Kh13 (GOST 5632-2014) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 1.4006 is typically used for cutlery, turbine blades, fasteners, surgical instruments, while GOST 5632 12Kh13 is commonly used for turbine blades, pump shafts, fasteners, cutlery.
EN 10088-1 1.4006 is defined under European Standard (EN) (Europe).
As per chemical composition, EN 10088-1 1.4006 vs GOST 5632 12Kh13 is a 95.5% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 97%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can EN 10088-1 1.4006 Be Substituted With GOST 5632 12Kh13?
EN 10088-1 1.4006 and GOST 5632 12Kh13 overlap closely enough on chemistry and mechanical properties that GOST 5632 12Kh13 is often considered as a substitute for EN 10088-1 1.4006 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10088-1 1.4006 and GOST 5632 12Kh13?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 1.4006 be substituted with GOST 5632 12Kh13?
EN 10088-1 1.4006 and GOST 5632 12Kh13 overlap closely enough on chemistry and mechanical properties that GOST 5632 12Kh13 is often considered as a substitute for EN 10088-1 1.4006 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.