Close Alternative — 76% match
based on chemical composition and mechanical property overlap.
EN 10088-1 1.4301 (EN 10088-1:2014) and BS 970 (Part 1) 304S11 (BS 970 (Part 1):1983) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 1.4301 is typically used for food equipment, chemical vessels, architectural, kitchenware, while BS 970 (Part 1) 304S11 is commonly used for austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (table 14, with table 15 for the cold drawn condition)..
EN 10088-1 1.4301 is defined under European Standard (EN), originating from Europe, while BS 970 (Part 1) 304S11 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, EN 10088-1 1.4301 vs BS 970 (Part 1) 304S11 is a 76% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a close alternative overall at 76%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10088-1 1.4301
BS 970 (Part 1) 304S11
Tensile Strength
≥520 MPa
Not specified
Yield Strength
≥210 MPa
Not specified
Elongation
≥45%
Not specified
Hardness
≤215 HB
Not specified
Typical Applications
EN 10088-1 1.4301
Food equipment, chemical vessels, architectural, kitchenware
BS 970 (Part 1) 304S11
Austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (Table 14, with Table 15 for the cold drawn condition).
Can EN 10088-1 1.4301 Be Substituted With BS 970 (Part 1) 304S11?
EN 10088-1 1.4301 and BS 970 (Part 1) 304S11 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between EN 10088-1 1.4301 and BS 970 (Part 1) 304S11?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 1.4301 be substituted with BS 970 (Part 1) 304S11?
EN 10088-1 1.4301 and BS 970 (Part 1) 304S11 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.