Strong Match — 88.9% match
based on chemical composition and mechanical property overlap.
EN 10088-1 1.4845 (EN 10088-1:2014) and JIS G4303 SUS310S (JIS G4303:2021) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 1.4845 is typically used for furnace parts, heat exchangers, kiln components, while JIS G4303 SUS310S is commonly used for furnace parts, heat treatment baskets, kiln components.
EN 10088-1 1.4845 is defined under European Standard (EN), originating from Europe, while JIS G4303 SUS310S is defined under Japanese Industrial Standards (JIS), originating from Japan.
As per chemical composition, EN 10088-1 1.4845 vs JIS G4303 SUS310S is a 100% match.
As per mechanical properties, the match is 66.7%.
Combined, this makes them a strong match overall at 88.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
JIS G4303 SUS310S specifies P, S which are not specified for EN 10088-1 1.4845.
Can EN 10088-1 1.4845 Be Substituted With JIS G4303 SUS310S?
EN 10088-1 1.4845 and JIS G4303 SUS310S overlap closely enough on chemistry and mechanical properties that JIS G4303 SUS310S is often considered as a substitute for EN 10088-1 1.4845 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10088-1 1.4845 and JIS G4303 SUS310S?
JIS G4303 SUS310S specifies P, S which are not specified for EN 10088-1 1.4845.
Can EN 10088-1 1.4845 be substituted with JIS G4303 SUS310S?
EN 10088-1 1.4845 and JIS G4303 SUS310S overlap closely enough on chemistry and mechanical properties that JIS G4303 SUS310S is often considered as a substitute for EN 10088-1 1.4845 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.