Post Stock Login Register

GB/T 3280 06Cr19Ni10 vs EN 10088-1 1.4301

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) and EN 10088-1 1.4301 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. GB/T 3280 06Cr19Ni10 is typically used for used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners., while EN 10088-1 1.4301 is commonly used for food equipment, chemical vessels, architectural, kitchenware. GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T), originating from China, while EN 10088-1 1.4301 is defined under European Standard (EN), originating from Europe.

As per chemical composition, GB/T 3280 06Cr19Ni10 vs EN 10088-1 1.4301 is a 80.1% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GB/T 3280 06Cr19Ni10:
EN 10088-1 1.4845 EN 10088-1 1.4006 EN 10088-1 1.4401 ASTM A959 16-8-2H ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H GOST 5632 12Kh13 IS 1570 (Part 7) 12Cr12MoH ASTM A959 202 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
80.1%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301
Standard GB/T 3280-2015 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.08 max ≤0.07
Si (%) 1.00 max ≤1.00
Mn (%) 2.00 max ≤2.00
Cr (%) 18.00-20.00 17.5–19.5
Ni (%) 8.00-11.00 8.0–10.5
P (%) 0.045 max ≤0.045
S (%) 0.030 max ≤0.030
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301
Tensile Strength 520-720 MPa ≥520 MPa
Yield Strength 205-310 MPa ≥210 MPa
Elongation 40-60% ≥45%
Hardness 187 HB max ≤215 HB
Typical Applications
GB/T 3280 06Cr19Ni10
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
EN 10088-1 1.4301
Food equipment, chemical vessels, architectural, kitchenware
Can GB/T 3280 06Cr19Ni10 Be Substituted With EN 10088-1 1.4301?
GB/T 3280 06Cr19Ni10 and EN 10088-1 1.4301 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 3280 06Cr19Ni10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2900–3300 mm (114.17–129.92 in)
EN 10088-1 1.4301
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3300 mm (98.43–129.92 in)
On M-EX Right Now
GB/T 3280 06Cr19Ni10
2 active listings and RFQs →
EN 10088-1 1.4301
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3280 06Cr19Ni10 and EN 10088-1 1.4301?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GB/T 3280 06Cr19Ni10 be substituted with EN 10088-1 1.4301?
GB/T 3280 06Cr19Ni10 and EN 10088-1 1.4301 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.