Post Stock Login Register

GB/T 3280 06Cr19Ni10 vs EN 10088-1 1.4401

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) and EN 10088-1 1.4401 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. GB/T 3280 06Cr19Ni10 is typically used for used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners., while EN 10088-1 1.4401 is commonly used for marine, chemical processing, pharmaceutical equipment. GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T), originating from China, while EN 10088-1 1.4401 is defined under European Standard (EN), originating from Europe.

As per chemical composition, GB/T 3280 06Cr19Ni10 vs EN 10088-1 1.4401 is a 61.7% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GB/T 3280 06Cr19Ni10:
EN 10088-1 1.4845 EN 10088-1 1.4301 EN 10088-1 1.4006 ASTM A959 16-8-2H ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H GOST 5632 12Kh13 IS 1570 (Part 7) 12Cr12MoH ASTM A959 202 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
61.7%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401
Standard GB/T 3280-2015 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.08 max ≤0.07
Si (%) 1.00 max ≤1.00
Mn (%) 2.00 max ≤2.00
Cr (%) 18.00-20.00 16.5–18.5
Ni (%) 8.00-11.00 10.5–13.5
P (%) 0.045 max Not specified
S (%) 0.030 max Not specified
Mo (%) Not specified 2.0–2.5
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401
Tensile Strength 520-720 MPa ≥520 MPa
Yield Strength 205-310 MPa ≥210 MPa
Elongation 40-60% ≥40%
Hardness 187 HB max ≤215 HB
Typical Applications
GB/T 3280 06Cr19Ni10
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
EN 10088-1 1.4401
Marine, chemical processing, pharmaceutical equipment
Key Differences
Can GB/T 3280 06Cr19Ni10 Be Substituted With EN 10088-1 1.4401?
GB/T 3280 06Cr19Ni10 and EN 10088-1 1.4401 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 3280 06Cr19Ni10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2900–3300 mm (114.17–129.92 in)
EN 10088-1 1.4401
Sheet → (4 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3400 mm (98.43–133.86 in)
On M-EX Right Now
GB/T 3280 06Cr19Ni10
2 active listings and RFQs →
EN 10088-1 1.4401
4 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3280 06Cr19Ni10 and EN 10088-1 1.4401?
GB/T 3280 06Cr19Ni10 specifies P, S which are not specified for EN 10088-1 1.4401. EN 10088-1 1.4401 specifies Mo which is not specified for GB/T 3280 06Cr19Ni10.
Can GB/T 3280 06Cr19Ni10 be substituted with EN 10088-1 1.4401?
GB/T 3280 06Cr19Ni10 and EN 10088-1 1.4401 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.