Post Stock Login Register

IS 11169 (Part 2) X07Cr17 vs EN 10088-1 X10CrAlSi18

Strong Match — 85.6% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 2) X07Cr17 (IS 11169 (Part 2):1989) and EN 10088-1 X10CrAlSi18 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. IS 11169 (Part 2) X07Cr17 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X10CrAlSi18 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 11169 (Part 2) X07Cr17 vs EN 10088-1 X10CrAlSi18 is a 85.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85.6%.

Frequently Compared With IS 11169 (Part 2) X07Cr17:
GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 12Kh13 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H IS 1570 (Part 7) 11Cr17Ni13W3TiH GOST 5632 08X18H10 EN 10088-1 1.4845
Match Breakdown
CHEMISTRY MATCH
85.6%
MECHANICAL MATCH
No shared data
OVERALL
85.6%
Specifications
Property IS 11169 (Part 2) X07Cr17 EN 10088-1 X10CrAlSi18
Standard IS 11169 (Part 2):1989 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.12 <=0.12
Si (%) <=1.0 0.70-1.40
Mn (%) <=1.0 <=1.00
Cr (%) 16.0-18.0 17.0-19.0
S (%) <=0.030 <=0.015
P (%) <=0.045 <=0.040
Al (%) Not specified 0.70-1.20
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 2) X07Cr17 EN 10088-1 X10CrAlSi18
Yield Strength (0.2% proof) >=270 MPa Not specified
Tensile Strength 450-600 MPa Not specified
Elongation >=20% Not specified
Condition Annealed reference test piece (Table 6 treatment) Not specified
Typical Applications
IS 11169 (Part 2) X07Cr17
Cold heading and cold extrusion; the standard covers wires, wire rods and bars (clause 1.1)
EN 10088-1 X10CrAlSi18
Not documented
Key Differences
Can IS 11169 (Part 2) X07Cr17 Be Substituted With EN 10088-1 X10CrAlSi18?
IS 11169 (Part 2) X07Cr17 and EN 10088-1 X10CrAlSi18 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X10CrAlSi18 is often considered as a substitute for IS 11169 (Part 2) X07Cr17 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 11169 (Part 2) X07Cr17
0 active listings and RFQs →
EN 10088-1 X10CrAlSi18
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 2) X07Cr17 and EN 10088-1 X10CrAlSi18?
EN 10088-1 X10CrAlSi18 specifies Al which is not specified for IS 11169 (Part 2) X07Cr17.
Can IS 11169 (Part 2) X07Cr17 be substituted with EN 10088-1 X10CrAlSi18?
IS 11169 (Part 2) X07Cr17 and EN 10088-1 X10CrAlSi18 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X10CrAlSi18 is often considered as a substitute for IS 11169 (Part 2) X07Cr17 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.