IS 5522 X07Cr17 vs GOST 5632 08X18H10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 5522 X07Cr17 (IS 5522:2014) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. IS 5522 X07Cr17 is typically used for utensils, while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications. IS 5522 X07Cr17 is defined under Bureau of Indian Standards (IS) (India).

As per chemical composition, IS 5522 X07Cr17 vs GOST 5632 08X18H10 is a 69% match. As per mechanical properties, the match is 33.3%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 5522 X07Cr17:
EN 10088-1 1.4845 EN 10088-1 1.4301 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
69%
MECHANICAL MATCH
33.3%
OVERALL
35%
Specifications
Property IS 5522 X07Cr17 GOST 5632 08X18H10
Standard IS 5522:2014 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) <=0.12 ≤0.08
Si (%) <=1.00 ≤0.80
Mn (%) <=1.00 ≤2.00
Ni (%) <=0.75 9.0–11.0
Cr (%) 16.0-18.0 17.0–19.0
S (%) <=0.030 ≤0.020
P (%) <=0.040 ≤0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 5522 X07Cr17 GOST 5632 08X18H10
Tensile Strength >=450 MPa ≥520 MPa
Yield Strength >=205 MPa ≥205 MPa
Elongation >=20% ≥40%
Hardness <=183 HB Not specified
Condition Annealed/softened Not specified
Typical Applications
IS 5522 X07Cr17
Utensils
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
Can IS 5522 X07Cr17 Be Substituted With GOST 5632 08X18H10?
IS 5522 X07Cr17 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 5522 X07Cr17
No active listings currently.
GOST 5632 08X18H10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
IS 5522 X07Cr17
0 active listings and RFQs →
GOST 5632 08X18H10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 5522 X07Cr17 and GOST 5632 08X18H10?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 5522 X07Cr17 be substituted with GOST 5632 08X18H10?
IS 5522 X07Cr17 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.