Close Alternative — 80.6% match
based on chemical composition and mechanical property overlap.
EN 10088-1 1.4006 (EN 10088-1:2014) and ASTM A959 410Cb (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 1.4006 is typically used for cutlery, turbine blades, fasteners, surgical instruments, while ASTM A959 410Cb is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1).
EN 10088-1 1.4006 is defined under European Standard (EN), originating from Europe, while ASTM A959 410Cb is defined under ASTM International, originating from United States.
As per chemical composition, EN 10088-1 1.4006 vs ASTM A959 410Cb is a 80.6% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a close alternative overall at 80.6%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
EN 10088-1 1.4006 specifies Ni which is not specified for ASTM A959 410Cb.
ASTM A959 410Cb specifies Cb, P, S which are not specified for EN 10088-1 1.4006.
Can EN 10088-1 1.4006 Be Substituted With ASTM A959 410Cb?
EN 10088-1 1.4006 and ASTM A959 410Cb are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between EN 10088-1 1.4006 and ASTM A959 410Cb?
EN 10088-1 1.4006 specifies Ni which is not specified for ASTM A959 410Cb. ASTM A959 410Cb specifies Cb, P, S which are not specified for EN 10088-1 1.4006.
Can EN 10088-1 1.4006 be substituted with ASTM A959 410Cb?
EN 10088-1 1.4006 and ASTM A959 410Cb are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.