Post Stock Login Register

SS 14 22 58 2258 vs GB/T 3077 12Cr2Ni4A

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

SS 14 22 58 2258 and GB/T 3077 12Cr2Ni4A (GB/T 3077-2015) are both steel grades. Both fall under the Alloy Steel category. SS 14 22 58 2258 is typically used for heavy duty shafts,gears,aircraft components,crankshafts,forgings,highly stressed bolts, while GB/T 3077 12Cr2Ni4A is commonly used for used for gears, shafts, pinions, aircraft parts, heavy-duty bearings, and transmission components.. SS 14 22 58 2258 is defined under Swedish Standards (SS), originating from Sweden, while GB/T 3077 12Cr2Ni4A is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, SS 14 22 58 2258 vs GB/T 3077 12Cr2Ni4A is a 64.1% match. As per mechanical properties, the match is 39.7%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With SS 14 22 58 2258:
NF A35-565 100C6 UNI 11234 100Cr6 GOST 4543 12HN3A IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 103Cr6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
64.1%
MECHANICAL MATCH
39.7%
OVERALL
35%
Specifications
Property SS 14 22 58 2258 GB/T 3077 12Cr2Ni4A
Standard SS 14 22 58 GB/T 3077-2015
Category Alloy Steel Alloy Steel
C (%) 0.30-0.38 0.10-0.15
Si (%) <=0.40 0.17-0.37
Mn (%) 0.50-0.80 0.30-0.60
P (%) <=0.025 0.025 max
S (%) <=0.035 0.025 max
Cr (%) 1.30-1.70 1.25-1.65
Mo (%) 0.15-0.30 Not specified
Ni (%) 1.30-1.70 3.25-3.75
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property SS 14 22 58 2258 GB/T 3077 12Cr2Ni4A
Tensile Strength 900-1100 MPa 980-1180 MPa
Yield Strength 700-900 MPa 785-980 MPa
Elongation 11-14 % 10-14%
Hardness 260-320 HB 58-62 HRC (case)
Typical Applications
SS 14 22 58 2258
heavy duty shafts,gears,aircraft components,crankshafts,forgings,highly stressed bolts
GB/T 3077 12Cr2Ni4A
Used for gears, shafts, pinions, aircraft parts, heavy-duty bearings, and transmission components.
Key Differences
Can SS 14 22 58 2258 Be Substituted With GB/T 3077 12Cr2Ni4A?
SS 14 22 58 2258 and GB/T 3077 12Cr2Ni4A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
SS 14 22 58 2258
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6500–6500 mm (255.91–255.91 in)
GB/T 3077 12Cr2Ni4A
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5000–6600 mm (196.85–259.84 in)
On M-EX Right Now
SS 14 22 58 2258
2 active listings and RFQs →
GB/T 3077 12Cr2Ni4A
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between SS 14 22 58 2258 and GB/T 3077 12Cr2Ni4A?
SS 14 22 58 2258 specifies Mo which is not specified for GB/T 3077 12Cr2Ni4A.
Can SS 14 22 58 2258 be substituted with GB/T 3077 12Cr2Ni4A?
SS 14 22 58 2258 and GB/T 3077 12Cr2Ni4A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.