Post Stock Login Register

SS 14 22 58 2258 vs IS 1570 (Part 4) 103Cr6

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

SS 14 22 58 2258 and IS 1570 (Part 4) 103Cr6 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. SS 14 22 58 2258 is defined under Swedish Standards (SS), originating from Sweden, while IS 1570 (Part 4) 103Cr6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, SS 14 22 58 2258 vs IS 1570 (Part 4) 103Cr6 is a 59.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With SS 14 22 58 2258:
NF A35-565 100C6 UNI 11234 100Cr6 GB/T 3077 12Cr2Ni4A GOST 4543 12HN3A IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
59.9%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property SS 14 22 58 2258 IS 1570 (Part 4) 103Cr6
Standard SS 14 22 58 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.30-0.38 0.95-1.10
Si (%) <=0.40 0.10-0.35
Mn (%) 0.50-0.80 0.25-0.45
P (%) <=0.025 Not specified
S (%) <=0.035 Not specified
Cr (%) 1.30-1.70 1.40-1.60
Mo (%) 0.15-0.30 Not specified
Ni (%) 1.30-1.70 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property SS 14 22 58 2258 IS 1570 (Part 4) 103Cr6
Tensile Strength 900-1100 MPa Not specified
Yield Strength 700-900 MPa Not specified
Elongation 11-14 % Not specified
Hardness 260-320 HB Not specified
Typical Applications
SS 14 22 58 2258
heavy duty shafts,gears,aircraft components,crankshafts,forgings,highly stressed bolts
IS 1570 (Part 4) 103Cr6
Not documented
Key Differences
Can SS 14 22 58 2258 Be Substituted With IS 1570 (Part 4) 103Cr6?
SS 14 22 58 2258 and IS 1570 (Part 4) 103Cr6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
SS 14 22 58 2258
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6500–6500 mm (255.91–255.91 in)
IS 1570 (Part 4) 103Cr6
No active listings currently.
On M-EX Right Now
SS 14 22 58 2258
2 active listings and RFQs →
IS 1570 (Part 4) 103Cr6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between SS 14 22 58 2258 and IS 1570 (Part 4) 103Cr6?
SS 14 22 58 2258 specifies P, S, Mo, Ni which are not specified for IS 1570 (Part 4) 103Cr6.
Can SS 14 22 58 2258 be substituted with IS 1570 (Part 4) 103Cr6?
SS 14 22 58 2258 and IS 1570 (Part 4) 103Cr6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.